Fast delivery within 72 Hours
Beckhoff KL2751
The KL2751 dimmer Bus Terminal is intended for direct connection of different lighting devices. Dimmable lighting devices such as incandescent lamps, inductive and electronic ballasts, are detected an…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
The KL2751 dimmer Bus Terminal is intended for direct connection of different lighting devices. Dimmable lighting devices such as incandescent lamps, inductive and electronic ballasts, are detected and controlled in the correct operating mode. The
Specification
| Connection Technology | 4-wire |
|---|---|
| Number Of Outputs | 1 |
| Nominal Voltage | 230 V AC |
| Mains Voltage | 230 V AC (50 Hz) |
| Rated Power | 300Â VAÂ (W) |
| Rated Current | max. 1.35 A |
| Load Type | ohmic, inductive or capacitive (not mixed), lamp load, automatic load detection |
| Max. Output Current | 1.35 A |
| Short Circuit Current | 10…20 A |
| Control Type | phase control |
| Resolution | 1% |
| Electrical Isolation | 500 V (K-bus/field voltage), 3750 V AC (1 min.) |
| Leakage Current (Off State) | 1 mA |
| Current Consumption Power Contacts | load only |
| Current Consumption K Bus | typ. 95 mA |
| Bit Width In The Process Image | output: 1 x 16Â bit data (1 x 8Â bit control/status optional) |
| Special Features | dimmers with fieldbus functionality |
| Weight | approx. 60 g |
| Operating Temperature | 0…55°C |
| Storage Temperature | -25…+85°C |
| Relative Humidity | 95%, no condensation |
| Vibration/Shock Resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Emc Immunity/Emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. Rating/Installation Pos. | IP20/see documentation |
| Pluggable Wiring | for all KSxxxx Bus Terminals |
| Approvals/Markings | CE |
| Design Form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side By Side Mounting By Means Of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection Cross Section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection Cross Section Awg | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping Length | 8…9 mm |
| Current Load Power Contacts | Imax: 10 A |
| Dimensions (W X H X D) | 12Â mm x 100Â mm x 68 mm |
Reviews
Clear filtersThere are no reviews yet.