Fast delivery within 72 Hours
Beckhoff EL2596-0030
The EL2596-0030 LED strobe control terminal contains a flexible power supply unit that supplies the LED with the required current and voltage. Applications from continuous light to short light pulses…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
The EL2596-0030 LED strobe control terminal contains a flexible power supply unit that supplies the LED with the required current and voltage. Applications from continuous light to short light pulses in the kHz range are thus possible. Each individual
Specification
| Connection Technology | 2-wire |
|---|---|
| Number Of Outputs | 1 |
| Input Voltage | 24 V DC (-15%/+20%) |
| Load Type | LED (ohmic) |
| Distributed Clocks | yes |
| Distributed Clock Precision | 1 µs |
| Output Voltage | continuous light mode : 0…UIN continuous light operation PWM: 0…(UIN – 0.5 V) pulsed operation (0…2 A): 0…(UIN – 2 V) pulsed operation (3 A*): 0…(UIN – 3 V) *linear behavior of the maximum output voltage between 2 A and 3 A |
| Max. Output Current | 0…3 A in pulsed mode (depending on output voltage and duty cycle) 0…1.2 A in continuous mode |
| Switching Times | typ. TON: 1 µs, typ. TOFF: 1 µs, pulses from 25 µs…10 s |
| Trigger Output (To Camera) | 1 (electrically isolated, max. 10 mA push-pull, 10…24 V DC, voltage adjustable via externally connectable voltage distributor) |
| Trigger Input (From Camera) | 1 (electrically isolated, typ. 3 mA, 4…24 V DC, switchable sensitivity) |
| Current Consumption E Bus | typ. 240 mA |
| Current Consumption Power Contacts | – |
| Calibration Certificate (Analog) | externally calibrated |
| Electrical Isolation | 500 V (E-bus/field potential) |
| Special Features | constant voltage, constant current and PWM as available operating modes; extensive real-time diagnostics; connection option voltage divider TriggerOut; continuous LED operation; RGB/common anode operation |
| Weight | approx. 55 g |
| Operating Temperature | 0…55°C |
| Storage Temperature | -25…+85°C |
| Relative Humidity | 95%, no condensation |
| Vibration/Shock Resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Emc Immunity/Emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. Rating/Installation Pos. | IP20/see documentation |
| Approvals/Markings | CE, UL |
| Design Form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side By Side Mounting By Means Of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection Cross Section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection Cross Section Awg | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping Length | 8…9 mm |
| Current Load Power Contacts | Imax: 10 A |
| Dimensions (W X H X D) | 12 mm x 100 mm x 68 mm |
Reviews
Clear filtersThere are no reviews yet.