Fast delivery within 72 Hours

Wago 894-8992/223-307

Cable assembly WINSTA® KNX F codingThe WINSTA® KNX cable assembly F coding allows assembly of fine-stranded and solid conductors. On PCBs, in control cabinets or for connecting lights – pluggable inst…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® KNX F codingThe WINSTA® KNX cable assembly F coding allows assembly of fine-stranded and solid conductors. On PCBs, in control cabinets or for connecting lights – pluggable installation connectors from WAGO allow you to establish connections according to various requirements in no time flat. The mechanical coding and color coding of the pluggable installation connector ensure error-free installation of the individual components – including protection against mismating. The pluggable installation connector is protected against ingress by solid objects in accordance with protection type IP20 (Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)). The KNX standard is the ultimate benchmark in building automation. It guarantees error-free, manufacturer-independent networking of advanced building systems. WINSTA® KNX pluggable installation connectors with F coding protect connections with protection against mismating in the domain of power supplies. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The safety requirements in connection with EU CPR are met by this product through fire class D. Eliminating halogens as an additive in the manufacture of this cable assembly significantly increases fire safety and minimises environmental contamination.Pluggable connections instead of screw connections – cable assemblies from WAGOThe cable assembly is equipped with a plug and a free end. The WINSTA® Pluggable Connection System is perfectly tailored to the strict requirements of building installation. It makes electrical installation pluggable, and consequently more efficient, even more reliable, and error-free. Using this pre-assembled system reduces assembly times and installation errors at the construction site. Choose durability and quality – with protection type IP20 from WAGO makes the electrical installation of electrical components significantly easier. saves time, since no wiring is required at the construction sitefor high-power connections for supplying powerready for immediate usequick replacement of defective units during ongoing operation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)50 V
Rated impulse withstand voltage (III / 3)0.8 kV
Rated current3 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage50 V
Rated impulse withstand voltage0.8 kV
Rated current3 A

Electrical data - General information

Note on contact resistanceApprox. 3 mΩ contact resistance

Connection data

Total number of potentials2
Conductor preparationstripped

Connection data - Connection 1

Conductor diameter0.8 mm
Strip length9 mm / 0.35 inches
Pole number2
Strip length (outer insulation)23 mm
Connection typePlug - Free end

Physical data

Width14.1 mm / 0.555 inches
Height11.1 mm / 0.437 inches
Total length3 m

Mechanical data

TechnologyKNX
UseKNX
CodingF
Variable codingNo
Marking1+ 2-
Potential marking1+ 2-
Mating force of a plug-in connectionapprox. 10 … 15 N
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionUnlocked: approx. 15 … 20 N
Number of mating cycles200
Connection typePlug - free end
Type of pre-assembled cableConnecting cable
Cable typeJ-Y(ST)Y…LG 1x2x0.8
Protection typeIP20; Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking of plug-in connectionnone

Material data

Note (material data)Information on material specifications can be found here
Colorgray
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Dca
Contact materialCopper alloy; surface-treated
Contact platingTin
Fire load3.317 MJ
Connector colorlight gray
Strain relief colorblack
Sheathed cable colorgray
Printing color of sheathed cableblack
Halogen-freeYes
Silicon-freeYes
Sheath materialHalogen-free
Rubber cableNo
Weight110.3 g
Copper weight of the raw cable0.01 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originDE
GTIN4050821281702
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Other

TechnologyKNX

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 894-8992/223-307”

Your email address will not be published. Required fields are marked *