Fast delivery within 72 Hours

Wago 891-8994/005-503

Cable assembly WINSTA® MINI rated current 10 AThe WINSTA® MINI cable assembly with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors can be used when cr…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® MINI rated current 10 AThe WINSTA® MINI cable assembly with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors can be used when criteria repeat or are planned on a defined grid, for example for installing grid lighting or flush-mount lighting. For greater protection in electrical installations, the pluggable installation connector is provided with mechanical protection against mismating. Solutions like the WINSTA® MINI pluggable installation connectors with B coding are suitable for process control, for example, for lighting or within data networks. Particularly where space is tight, our smallest pluggable connection system, WINSTA® MINI, consistently displays its advantages. It saves space, and, thanks to Push-in CAGE CLAMP® spring pressure connection technology, it additionally can be installed quickly, since the connection is low-maintenance and requires no screw connections. According to the European CPR, the fire class of the cables used in construction is critical for building safety, too. For houses with medium-level safety requirements, cable assemblies with fire class E are suitable.Fast, secure pluggable connections – cable assemblies from WAGOThe cable is pre-assembled with a socket and a plug. The WINSTA® Pluggable Connection System is ideally tailored to the strict requirements of building installation. It makes electrical installation pluggable, and thus more efficient, more reliable, and error-free. Use of this pre-assembled system reduces assembly times and installation errors at the construction site. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with strain relief hosting from WAGO. effective protection against mismatingeasy tool-free operation, a wide range of coding optionswith B coding for controllers, for example sun blinds and lighting fixturesflexible installation to save spaceconvenient installation and commissioning

Specification

Notes

NoteCables with a different fire class can be found in the eShop.
Variants:Other pole markings, Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)400 V
Rated impulse withstand voltage (III / 3)6 kV
Rated current10 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage400 V
Rated impulse withstand voltage6 kV
Rated current10 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials4

Connection data - Connection 1

Pole number4
Wire cross-section1 mm²
Connection typeSocket - Plug

Physical data

Pin spacing4.4 mm / 0.173 inches
Width23.2 mm / 0.913 inches
Height16 mm / 0.63 inches
Total length5 m

Mechanical data

UseControl technology
CodingB
Variable codingNo
Marking1 2 3 4
Potential marking1 2 3 4
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - Plug
Type of pre-assembled cableInterconnecting cable
Cable typeControl line 4x1
Protection typeIP20; IP40 when mated

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorgray
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.558 MJ
Connector colorgray
Strain relief colorblack
Sheathed cable colorgray
Printing color of sheathed cableblack
Halogen-freeNo
Silicon-freeYes
Sheath materialPVC
Rubber cableNo
Weight418.6 g
Copper weight of the raw cable0.0384 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originPL
GTIN4050821295518
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 891-8994/005-503”

Your email address will not be published. Required fields are marked *