Fast delivery within 72 Hours

Wago 891-8382/216-401

Cable assembly WINSTA® MINI with protection against mismatingThe WINSTA® MINI cable assembly I coding is the pluggable solution for your application in control cabinets, on PCBs or for lighting connec…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® MINI with protection against mismatingThe WINSTA® MINI cable assembly I coding is the pluggable solution for your application in control cabinets, on PCBs or for lighting connections. On PCBs, in control cabinets or for connecting lights – pluggable installation connectors from WAGO allow you to establish connections according to many different requirements in next to no time. The coding options reduce installation errors, allowing fast, maintenance-free wiring of all components. Controlled lighting, as used in the DALI standard, for example, is the main use of WINSTA® MINI pluggable installation connectors with I coding. WINSTA® MINI satisfies the demand for miniaturisation. Our smallest pluggable connection system is especially suitable for lights, for instance, since due to LED technology, these offer much less space for the connection technology. This product meets all the safety requirements of fire class D; therefore it can be used in areas where fire safety is relevant. Not using halogen additives in the manufacture of this cable assembly substantially increases fire safety and minimises environmental contamination.Pluggable connections instead of screw connections – cable assemblies from WAGOThe cable is pre-assembled with a plug and a free end. The WINSTA® Pluggable Connection System is ideally tailored to the strict requirements of building installation. It makes electrical installation pluggable, and consequently more efficient, more reliable, and error-free. Using this pre-assembled system reduces time spent on assembly and installation errors at the construction site. Enjoy the benefits of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with protection type IP20 from WAGO. protection against mismating eliminates errorscompact design for conductors with a cross-section up to 1.5 mm²with I coding for controlling light (DALI standard)ready for immediate useconvenient installation and commissioning

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current16 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials2
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number2
Wire cross-section1.5 mm²
Strip length (outer insulation)32 mm
Connection typePlug - free end

Physical data

Pin spacing4.4 mm / 0.173 inches
Width15.6 mm / 0.614 inches
Height13.2 mm / 0.52 inches
Total length4 m

Mechanical data

UseDALI, Lighting Management
CodingI
Variable codingNo
Marking+ -
Potential marking+ -
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typePlug - free end
Type of pre-assembled cableConnecting cable
Cable typeH05Z1Z1-F 2x1.5
Protection typeIP20; IP40 when mated

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionLocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorblue
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Dca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.155 MJ
Connector colorblue
Strain relief colorblack
Sheathed cable colorblack
Printing color of sheathed cablewhite
Halogen-freeYes
Silicon-freeYes
Sheath materialHalogen-free
Rubber cableNo
Weight317.6 g
Copper weight of the raw cable0.029 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originPL
GTIN4066966516944
Customs tariff number85444290900

Product Classification

UNSPSC26121629
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 891-8382/216-401”

Your email address will not be published. Required fields are marked *