Fast delivery within 72 Hours

Wago 787-612

Features:Switched-mode power supplySuitable for protection class I equipmentSuitable for both parallel and series operationNatural convection cooling when horizontally mountedEncapsulated for use in c…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Features:Switched-mode power supplySuitable for protection class I equipmentSuitable for both parallel and series operationNatural convection cooling when horizontally mountedEncapsulated for use in control cabinetsElectrically isolated output voltage (SELV) per EN 60950-1/UL 60950

Specification

Technical data - Input

Phases1
Nominal input voltage U<sub>i nom</sub>1 x 100 … 240 VAC; 140 … 300 VDC, 1 x AC 100 … 240 V; DC 140 … 300 V
Input voltage range1 x 90 … 264 VAC; 130 … 300 VDC
Nominal mains frequency range50 … 60 Hz; 0 Hz
Input current I<sub>i</sub>≤ 0.6 A (230 VAC)
Inrush current≤ 50 A
Power factor correction (PFC)Passive
Mains failure hold-up time≥ 20 ms (230 VAC)

Technical data - Output

Nominal output voltage U<sub>o nom</sub>24 VDC (SELV)
Output voltage range22 … 28.8 VDC (adjustable)
Default settingDC 24 V
Nominal output current I<sub>o nom</sub>2.5 A (24 VDC)
Deviation≤ 2 %
Residual ripple≤ 100 mV (peak-to-peak)
Current limitation1.1 x Io nom (typ.)
Overload behaviorConstant current

Technical data - Signaling and communication

Operation status indicatorGreen LED (24 V OK)

Technical data - Efficiency/power losses

Power loss P<sub>l</sub>≤ 7 W
Power loss (max.) P<sub>l (max.)</sub>8 W (90 VAC / 24 VDC; 2.5 A)
Efficiency (typ.)90 %

Technical data - Circuit protection

Internal fuseT 1.6 A / 250 VAC
Pre-fuse (required)An external DC fuse is required for the DC input voltage.
Backup fuse (recommended)Circuit breaker: C10 or B16

Safety and protection

Isolation voltage (sec.-PE)0.7 kVDC
Protection classI
Protection typeIP20; per EN 60529
Resistance to reverse feed≤ 30 VDC
Pollution degree2
Transient suppression (primary)Varistor
Overvoltage protection; secondaryInternal protective circuit, ≤ 40 VDC (in the event of a fault)
Short-circuit-protectedYes
Open-circuit-proofYes
Parallel operationYes
Series operationYes

Connection data

Note (conductor cross-section)12 AWG: THHN, THWN

Connection data - Connection 1

Connection typeInput/output
Connection technologyCAGE CLAMP®
WAGO connectorWAGO 231 Series
Solid conductor0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 12 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width51 mm / 2.008 inches
Height120 mm / 4.724 inches
Depth from upper-edge of DIN-rail133 mm / 5.236 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Fire load4.4 MJ
Weight612.7 g

Environmental requirements

Ambient temperature (operation)-10 … +70 °C
Ambient temperature (storage)-25 … +85 °C
Relative humidity30 … 85 % (no condensation permissible)
Derating−3 %/K (> 50 °C)
Climatic category3K3 (per EN 60721)

Standards and specifications

Conformity markingCE
Standards/specificationsEN 60950-1, EN 61204-3, UL 60950, UL 508, DNV

Commercial data

Product Group6 (INTERFACE ELECTRONIC)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4045454435202
Customs tariff number85044083900
End of Sale2022-09-01
End of Production2022-09-07
End of Delivery2023-02-28
End of Service and Repair2025-02-28

Product Classification

UNSPSC39121004
eCl@ss 10.027-04-07-01
eCl@ss 9.027-04-07-01
ETIM 9.0EC002540
ETIM 10.0EC002540
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 787-612”

Your email address will not be published. Required fields are marked *