Fast delivery within 72 Hours
Wago 787-1692
Features:Switched-mode power supplySupplies AS-Interface fieldbus systemsNatural convection cooling when horizontally mountedEncapsulated for use in control cabinetsElectrically isolated output voltag…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Features:Switched-mode power supplySupplies AS-Interface fieldbus systemsNatural convection cooling when horizontally mountedEncapsulated for use in control cabinetsElectrically isolated output voltage (SELV) per ENÂ IECÂ 61010-2-201 and ULÂ 60950
Specification
Technical data - Input
| Phases | 1 |
|---|---|
| Nominal input voltage U<sub>i nom</sub> | 1 x 100 … 240 VAC |
| Input voltage range | 1 x 85 … 264 VAC; 120 … 372 VDC |
| Nominal mains frequency range | 47 … 63 Hz; 0 Hz |
| Input current I<sub>i</sub> | ≤ 1.81 A (100 VAC); ≤ 0.91 A (230 VAC) |
| Inrush current | ≤ 30 A (NTC) |
| Power factor correction (PFC) | Passive |
| Mains failure hold-up time | ≥ 13 ms (100 VAC); ≥ 100 ms (230 VAC) |
Technical data - Output
| Nominal output voltage U<sub>o nom</sub> | 30.5 VDC (SELV) |
|---|---|
| Output voltage range | 29 … 32 VDC (adjustable) |
| Default setting | DC 30.5 V |
| Nominal output current I<sub>o nom</sub> | 3 A (AS-i compatible) |
| Deviation | ≤ 1 % |
| Load regulation | ≤ 1 % |
| Overload behavior | Constant current (without shutdown in the event of overload) |
Technical data - Signaling and communication
| Operation status indicator | Green LED (DC OK) |
|---|
Technical data - Efficiency/power losses
| Power loss P<sub>l</sub> | ≤ 2.3 W (no load); ≤ 14 W (nominal load) |
|---|---|
| Power loss (max.) P<sub>l (max.)</sub> | 15 W (264 VAC / 30.5 VDC; 3 A) |
| Efficiency (typ.) | 88 % |
Technical data - Circuit protection
| Internal fuse | T 4 A / 250 VAC |
|---|---|
| Pre-fuse (required) | An external DC fuse is required for the DC input voltage. |
| Backup fuse (recommended) | Circuit breaker: C10 or B16 |
Safety and protection
| Isolation voltage (pri.-sec.) | DC 4.242 kV |
|---|---|
| Isolation voltage (pri.-PE) | DC 2.2 kV |
| Isolation voltage (sec.-PE) | 0.7 kVDC |
| Protection class | II |
| Protection type | IP20; per EN 60529 |
| Resistance to reverse feed | ≤ 63 VDC |
| Overvoltage category | II |
| Pollution degree | 2 |
| Transient suppression (primary) | Varistor |
| Overvoltage protection; secondary | ≤ 40 VDC (in the event of a fault) |
| Short-circuit-protected | Yes |
| Open-circuit-proof | Yes |
| Parallel operation | No |
| Series operation | Yes |
| MTBF | > 500,000 h (per IEC 61709) |
Connection data
| Note (conductor cross-section) | 12 AWG: THHN, THWN |
|---|
Connection data - Connection 1
| Connection type | Input/output |
|---|---|
| Connection technology | CAGE CLAMP® |
| WAGO connector | WAGO 721 Series |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
| Width | 52 mm / 2.05 inches |
|---|---|
| Height | 96.5 mm / 3.78 inches |
| Depth from upper-edge of DIN-rail | 13.5 mm / 4.06 inches |
Mechanical data
| Mounting type | DIN-35 rail |
|---|---|
| Mounting position | Horizontal |
Material data
| Weight | 380 g |
|---|
Environmental requirements
| Ambient temperature (operation) | -25 … +70 °C |
|---|---|
| Ambient temperature (storage) | -25 … +85 °C |
| Relative humidity | 5 … 96 % (no condensation permissible) |
| Derating | −3 %/K (> 50 °C) |
| Climatic category | 3K3 (per EN 60721) |
Standards and specifications
| Standards/specifications | EN 61558-2-16, EN 61010-1, EN 61010-2-201, EN 60335-1, EN 61204-3, EN 61140, UL 508, UL 60950, AS-Interface |
|---|
Commercial data
| PU (SPU) | 1 pcs |
|---|---|
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4066966335330 |
| Customs tariff number | 85044083900 |
Product Classification
| UNSPSC | 39121004 |
|---|---|
| ETIM 9.0 | EC002540 |
| ETIM 10.0 | EC002540 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| RoHS Compliance Status | Compliant,No Exemption |
|---|
Reviews
Clear filtersThere are no reviews yet.