Fast delivery within 72 Hours

Wago 774-9993/117-101

Cable assembly WINSTA® RD 3-poleThe WINSTA® RD cable assembly with protection against mismating is the pluggable solution for your application in control cabinets, on PCBs or for lighting connections….

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® RD 3-poleThe WINSTA® RD cable assembly with protection against mismating is the pluggable solution for your application in control cabinets, on PCBs or for lighting connections. The pluggable installation connectors with spring pressure connection technology work entirely without screw connections. They allow fast, efficient, error-free installation in a large number of possible uses. The coding options reduce installation errors, allowing fast, secure wiring of all components. The pluggable installation connector is protected in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). That results in the fact that users’ fingers will never come into contact with live elements. This pluggable installation connector can be used for electrical currents up to 20 A. Thus the product is also suitable for high power loads. With WINSTA® RD, we have created a product line that fits perfectly into boreholes or conduits due to its design. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The mandatory safety requirements in connection with EU CPR are met by this product through fire class E. Eliminating halogens as an additive in the production of this cable assembly significantly increases fire safety and minimises environmental pollution.Fast, error-free assembly thanks to cable assemblies from WAGOA socket and a free end are provided. The WINSTA® Pluggable Connection System allows pluggable electrical installation. This saves time, lowers costs, and reduces the need for servicing. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with protection against mismating from WAGO. pluggable installation connectors with protection against mismatingsaves time, since no wiring is required at the construction sitewith A coding for a large number of applicationsflexible installation to save spacerapid, structured electrical installation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current20 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current20 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials3
PE functionPreceding PE contact
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number3
Wire cross-section2.5 mm²
Strip length (outer insulation)55 mm
Connection typeSocket - Free end

Physical data

Width17.5 mm / 0.689 inches
Height17.5 mm / 0.689 inches
Total length1 m

Mechanical data

UseGeneral mains applications
Variable codingNo
MarkingL ⏚ N
Mating force of a plug-in connectionapprox. 30 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionUnlocked: approx. 30 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - Free end
Type of pre-assembled cableConnecting cable
Cable typeH05Z1Z1-F 3G2.5
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while incorrectly rotated c.) plugging while laterally staggered
Locking of plug-in connectionlocking lever

Material data

Note (material data)Information on material specifications can be found here
Colorblack
Insulation material (main housing)Polyamide (PA66)
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load29.442 MJ
Connector colorblack
Strain relief colorblack
Sheathed cable colorblack
Printing color of sheathed cablewhite
Halogen-freeYes
Silicon-freeYes
Sheath materialHalogen-free
Rubber cableNo
Weight151.9 g
Copper weight of the raw cable0.072 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originDE
GTIN4045454323202
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 774-9993/117-101”

Your email address will not be published. Required fields are marked *