Fast delivery within 72 Hours

Wago 774-9293/117-601

Cable assembly WINSTA® RD rated current 20 AFor signal and power transmission: The WINSTA® RD cable assembly A coding. Whether on PCBs, in control cabinets or for connecting lights – pluggable install…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Cable assembly WINSTA® RD rated current 20 AFor signal and power transmission: The WINSTA® RD cable assembly A coding. Whether on PCBs, in control cabinets or for connecting lights – pluggable installation connectors from WAGO allow you to establish connections according to many different requirements in no time flat. The coding options reduce installation errors, allowing fast, maintenance-free wiring of all components. The pluggable installation connector is protected against ingress by solid objects in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). This pluggable installation connector is used for electrical currents up to 20 A. Thus the product is also suitable for high power loads. WINSTA® RD: Solutions from this product line are suitable for drill holes and conduits with diameters up to 20 mm. Anyone who needs to take into account technical safety requirements for fire protection reasons for electrical installation should be able to rely on the quality of the components. Our product meets the strict safety standards of fire class B2. The cable assembly is halogen-free. This eliminates the addition of environmental pollutants during production. It also achieves a higher fire class, since halogen-free materials do not easily ignite.Pluggable connections instead of screw connections – cable assemblies from WAGOThe cable is pre-assembled with a socket and a free end. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It allows error-free installation of cables and components, quickly and reliably. Now you can also reduce installation costs without compromising safety and quality: with strain relief hosting eliminates the need for servicing and prevents unnecessary downtime. protection against mismating eliminates errorssaves time, since no wiring is required at the construction sitesuitable for any applicationexact dimensionsquick replacement of defective units during ongoing operation

Specification

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current20 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current20 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials3
PE functionPreceding PE contact
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number3
Wire cross-section2.5 mm²
Strip length (outer insulation)55 mm
Connection typeSocket - Free end

Physical data

Width17.5 mm / 0.689 inches
Height17.5 mm / 0.689 inches
Total length6 m

Mechanical data

UseGeneral mains applications
CodingA
Variable codingNo
MarkingL ⏚ N
Mating force of a plug-in connectionApprox. 30 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionUnlocked: approx. 30 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - Free end
Type of pre-assembled cableConnecting cable
Cable typeH05Z1Z1-F 3G2.5
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while incorrectly rotated c.) plugging while laterally staggered
Locking of plug-in connectionLocking lever

Material data

Note (material data)Information on material specifications can be found here
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Fire class per EN 50575B2ca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.162 MJ
Connector colorblack
Strain relief colorblack
Sheathed cable colorblack
Printing color of sheathed cablewhite
Halogen-freeYes
Silicon-freeYes
Sheath materialHalogen-free
Rubber cableNo
Weight949.4 g
Copper weight of the raw cable0.072 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originDE
GTIN4055143749312
Customs tariff number85444290900

Product Classification

UNSPSC26121629
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 774-9293/117-601”

Your email address will not be published. Required fields are marked *