Fast delivery within 72 Hours

Wago 770-774

Male connector/plug WINSTA® MIDI rated current 25 AThe WINSTA® MIDI male connector/plug with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors can be us…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Male connector/plug WINSTA® MIDI rated current 25 AThe WINSTA® MIDI male connector/plug with protection type IP20 supports fast, reliable installation. WAGO pluggable installation connectors can be used when requirements repeat or are distributed on a specified grid, for example for installing grid lighting or flush-mount lighting. The coding options reduce installation errors, allowing fast, secure wiring of all components. The pluggable installation connector offers protection against contact with live components in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). Pluggable installation connectors with B coding from the WINSTA® MIDI line are available in gray, light green, or pink, allowing you to distinguish different circuits, for example for pumps, lighting, or sun blinds. Your own pole marking is possible as well. Important parameters in the selection of a pluggable installation connector are the rated current and voltage: They tell us about the product’s domains of use. This product has a current rating of 25 A – as a result it is suitable for high power loads. Our WINSTA® MIDI product line allows maximum flexibility for the electrical installation. Through its Push-in CAGE CLAMP® spring pressure connection technology, it guarantees time-saving, error-free installation and offers customization for meeting an enormous variety of installation requirements.WINSTA® MIDI solutions for your electrical installation – protected against mismating and maintenance-freeThe WINSTA® Pluggable Connection System is ideally tailored to the very strict requirements of building installation. It makes electrical installation pluggable, and therefore faster, even more reliable, and error-free. Using this pre-assembled system reduces assembly times and installation errors at the construction site. Choose durability and quality – with locking lever from WAGO makes the electrical installation of electrical components visibly easier. effective protection against mismatingsimple circuitsfor automation controllersready for immediate usefast, secure installation

Specification

Notes

NoteThe snap-in connectors must be relieved of tensile and transverse forces.A surface finish can influence the edge radius of the cutouts. This may affect the snap-in socket fit, so ensure an adequate fit before use. In addition, the punched edge should be on the inside for punched cutouts.The wings of the snap-in connectors must not be mechanically stressed for a long period before use (e.g., due to a pre-locking position).
Variants:Other pole markings, Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)400 V
Rated impulse withstand voltage (III / 3)6 kV
Rated current25 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage400 V
Rated impulse withstand voltage6 kV
Rated current25 A

Electrical data - Ratings per IEC/EN – Notes

Rated current (note)25 A for 3-pole load20 A for 4-pole load

Electrical data - Ratings per UL 1977

Note for the US marketSome versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
Rated voltage (UL 1977)600 V
Rated current UL 197723 A
Approvals perUL 1977
Rated voltage600 V
Rated current23 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Clamping units8
Total number of potentials4

Connection data - Connection 1

Connection technologyPush-in CAGE CLAMP®
Actuation typeOperating tool, Push-in
Nominal cross-section4 mm² / 12 AWG
Solid conductor0.5 … 4 mm² / 20 … 12 AWG
Solid conductor; push-in termination1.5 … 4 mm² / 16 … 12 AWG
Stranded conductor0.5 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor; with insulated ferrule0.25 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor; with uninsulated ferrule0.25 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor; with ferrule; push-in termination1.5 mm² / 16 AWG
Strip length9 mm / 0.35 inches
Pole number4
Conductor entry direction to mating direction0 °

Physical data

Pin spacing10 mm / 0.394 inches
Width45.5 mm / 1.791 inches
Height18.5 mm / 0.728 inches
Depth41.1 mm / 1.618 inches

Mechanical data

UseControl technology
CodingB
Variable codingYes
Marking4 3 2 1
Potential marking4 3 2 1
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionLocked: > 80 N
Unmating force of a plug-in connectionUnlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Housing sheet thickness0.5 … 2 mm / 0.02 … 0.079 inches
Mounting typeSnap-in flange
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)

Plug-in connection

Contact type (pluggable connector)Male connector/plug
Connector (connection type)for conductor
Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leveryes
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorlight green
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Clamping spring materialChrome-nickel spring steel (CrNi)
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.309 MJ
Weight14.8 g

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureInsulating parts for temperatures ≤ 105 °C

Commercial data

Product Group20 (Winsta)
PU (SPU)100 pcs
Packaging typebox
Country of originPL
GTIN4050821458197
Customs tariff number85366990990

Product Classification

UNSPSC39121421
eCl@ss 10.027-44-06-02
eCl@ss 9.027-44-06-02
ETIM 9.0EC002566
ETIM 10.0EC002566
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 770-774”

Your email address will not be published. Required fields are marked *