Fast delivery within 72 Hours

Wago 753-418

This digital input module receives control signals from the field side and supplies a short-circuit proof voltage to the sensors. The module transfers the control signals and other information via a f…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This digital input module receives control signals from the field side and supplies a short-circuit proof voltage to the sensors. The module transfers the control signals and other information via a fieldbus coupler to the higher-level controller.Each input module has a noise-rejection filter.Each sensor can be supplied separately. A short circuit to ground is indicated as an error/fieldbus failure and a message is sent to the supervisory control.The error is canceled via the controller after it has been rectified (active acknowledgment by a user).Field and system levels are electrically isolated.

Specification

Notes

NotePluggable connectors and coding fingers (753 Series) are not included.

Technical data

Number of digital inputs2
Total number of channels (module)2
Signal typeDigital
Signal type (voltage)24 VDC
Sensor connection2 x (2-wire, 3-wire)
Input characteristichigh-side switching
Input filter3 ms
Input current per channel for signal (1) typ.3.7 mA
Voltage range for signal (0)−3 … +5 VDC
Voltage range for signal (1)15 … 30 VDC
Output current per channel0.5 A
Short-circuit current1.5 A, pulsating due to thermal overload protection
Sensor supply24 VDC
DiagnosticsShort circuit, active acknowledgment after error rectified
Input data width (internal) max.4 Bit
Output data width (internal) max.4 Bit
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)12 mA
Supply voltage (field)24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A, C) green: Status DI 1, DI 2; LED (B, D) red: Error DI 1, DI 2
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A

Connection data

Connection technology: I/O8 x CAGE CLAMP® (inputs)
Connectable conductor materialsCopper
Connection typeInput
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail62.6 mm / 2.465 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorpluggable

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.649 MJ
Weight43.9 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61000-6-2, marine applications
EMC emission of interferenceper EN 61000-6-4, marine applications
Exposure to pollutantsper IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4044918817073
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-04
eCl@ss 9.027-24-26-04
ETIM 9.0EC001599
ETIM 10.0EC001599
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 25550-51-0, 7439-92-1, 79-94-7
REACH Candidate List Substance2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, 4-Methyl-1,2-cyclohexanedicarboxylic anhydride, Diboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)afc88ce3-d5cb-4e9f-83f8-31196ab84b64
SCIP notification number (Belgium)c26f5685-2e2d-4e60-905b-bdab9651302f
SCIP notification number (Bulgaria)8ef992c6-5b54-4d5e-91e1-4c411e8082f7
SCIP notification number (Czech Republic)fc3d890b-3498-46db-8898-2cf42e837ea7
SCIP notification number (Denmark)7f50cbbd-38a0-4403-aafc-2e22d836617b
SCIP notification number (Finland)065f752d-fb32-4105-8fd3-c3c0dcb338b2
SCIP notification number (France)c1aac594-c112-4729-8bba-0e1927fa120b
SCIP notification number (Germany)59ebdd31-ee67-4bf6-8425-ac06971dd253
SCIP notification number (Hungary)5b6f4bdd-7fb4-4672-a333-f6889f18ac9d
SCIP notification number (Italy)42b6d7da-ed87-462d-9a0d-31b34e5bd077
SCIP notification number (Netherlands)6688a258-388a-4f69-8b5c-6e7f7eb9305a
SCIP notification number (Poland)522958d7-77e7-411d-a637-fddc23d5dcfe
SCIP notification number (Romania)86f44426-8035-43f9-9fa3-abeea9dfb6cc
SCIP notification number (Sweden)9ddb0e44-0c36-4f3b-809e-1fc99362d707

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 753-418”

Your email address will not be published. Required fields are marked *