Fast delivery within 72 Hours

Wago 750-652/025-000

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by the WAGO I/O System 750. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master.The 2560-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss.The 512-byte output buffer provides fast transmission of larger data strings.The module can be configured via WAGO-I/O-CHECK or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application.

Specification

Technical data

Signal typeRS-232, RS-422 / RS-485
Transmission rate300 Bd … 115.2 kBd
Bit transferRS-485/-422: ISO 8482 / DIN 66259 - 4; RS-232: EIA/TIA-232-F
Transmission channels1 TxD / 1 RxD, full-duplex, half-duplex
Line lengthRS-485/-422: approx. 1000 m (max.) twisted pair, RS-232: 40 m (max.)
Data width1 x 46/1 x 22/1 x 6-byte input/output (parameterizable), 2-byte control/status
ParityNone/Odd/Even
Number of data bits7/8, adjustable
Number of stop bits1/2, adjustable
Buffer2560-byte input / 512-byte output
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)85 mA
Supply voltage (field)24 VDC; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A-H) green/yellow/red: function, transmission status, reception status, error (buffer full), RS … active, flow control active, user LED 1, user LED 0
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.711 MJ
Weight50.5 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)-20 … +60 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Relative humidity (with condensation)Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of −20 to +60 °C (except for wind-driven precipitation, water and ice formation)
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61131-2, marine applications
EMC emission of interferenceper EN 61131-2, marine applications
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4050821129110
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-08
eCl@ss 9.027-24-26-08
ETIM 9.0EC001604
ETIM 10.0EC001604
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption7(c)-I, 6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)27032d0a-883d-468f-9cb6-088aed8ef215
SCIP notification number (Belgium)065a1859-4dfa-4afa-93ea-596bb13ab6a1
SCIP notification number (Bulgaria)bc6d1a6b-6f1a-4bd0-aa78-fae884cac4c2
SCIP notification number (Czech Republic)c52bcfbd-3c89-44b0-99f5-79335a9b9081
SCIP notification number (Denmark)9fa9f45b-63fd-4d35-94f4-77cf78b4bc9e
SCIP notification number (Finland)d2ecd908-0222-4148-9094-474952bfb124
SCIP notification number (France)735a8f7a-a40a-40c8-8156-1c1b84a256be
SCIP notification number (Germany)4848744b-bedb-47ea-8a40-c29e8eb81f1c
SCIP notification number (Hungary)212333fc-06fd-4fc9-8837-cf964aa99fac
SCIP notification number (Italy)895f8dbb-56a3-45b1-9efb-2f5ec6f859e4
SCIP notification number (Netherlands)24e2dd56-f34e-4faa-95c1-148f86c586bb
SCIP notification number (Poland)61305c86-7651-4591-b007-860a9db7ce8a
SCIP notification number (Romania)8cc341f1-4585-4430-98ea-9f5f63872f71
SCIP notification number (Sweden)19b7563f-d21d-4e0a-aee1-e064b492ab81

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-652/025-000”

Your email address will not be published. Required fields are marked *