Fast delivery within 72 Hours

Wago 750-652

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This serial interface module connects RS‐485/-422 or RS-232 C interface devices to the WAGO I/O System 750. It also provides gateways between the serial interface and the fieldbus systems supported by the WAGO I/O System 750. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master.The 2560-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss.The 512-byte output buffer provides fast transmission of larger data strings.The module can be configured via WAGO-I/O-CHECK or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application.

Specification

Notes

NoteCompatible with Couplers/Controllers:See manual in Section 3 “Device Description”

Technical data

Signal typeRS-232, RS-422 / RS-485
Transmission rate300 Bd … 115.2 kBd
Bit transferRS-485/-422: ISO 8482 / DIN 66259 - 4; RS-232: EIA/TIA-232-F
Transmission channels1 TxD / 1 RxD, full-duplex, half-duplex
Line lengthRS-485/-422: approx. 1000 m (max.) twisted pair, RS-232: 40 m (max.)
Data width1 x 46/1 x 22/1 x 6-byte input/output (parameterizable), 2-byte control/status
ParityNone/Odd/Even
Number of data bits7/8, adjustable
Number of stop bits1/2, adjustable
Buffer2560-byte input / 512-byte output
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)85 mA
Supply voltage (field)24 VDC; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A-H) green/yellow/red: function, transmission status, reception status, error (buffer full), RS … active, flow control active, user LED 1, user LED 0
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.713 MJ
Weight49.8 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61131-2, marine applications
EMC emission of interferenceper EN 61131-2, marine applications
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4050821002949
Customs tariff number85389099990

Product Classification

UNSPSC32101517
eCl@ss 10.027-24-26-08
eCl@ss 9.027-24-26-08
ETIM 9.0EC001604
ETIM 10.0EC001604
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption7(c)-I, 6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)782aad7f-4fb0-49fa-824c-0a93e99b09d0
SCIP notification number (Belgium)0ef2de56-82ce-4989-a9a8-a2334f585e4e
SCIP notification number (Bulgaria)e9f5fce0-9cba-47e0-9af9-66d9c4e85195
SCIP notification number (Czech Republic)88b81ec5-8c85-4f4e-8b59-69604c86fd5c
SCIP notification number (Denmark)06cdfd7e-ac4d-4e10-8637-cf978dd02987
SCIP notification number (Finland)55444772-4c91-416b-92e4-c497afffabaa
SCIP notification number (France)d7c55103-70d1-40cb-81d9-0dd32108d103
SCIP notification number (Germany)ac0d6e7b-3595-40fc-ad11-ed2b2d40797e
SCIP notification number (Hungary)91b9e00d-0af4-4977-ab7b-e320d944267d
SCIP notification number (Italy)3b9977ba-893b-4df0-a7fa-0441a6ed3809
SCIP notification number (Netherlands)e0d1d733-3c2e-4425-b7a0-037741c2fe6a
SCIP notification number (Poland)01af622a-b069-4742-b90e-572880aeb645
SCIP notification number (Romania)f61e2d9f-d7cc-47cb-a761-fef8ee5319f7
SCIP notification number (Sweden)1647cbcc-dbe0-4c40-abab-de8dc8fcd37f

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-652”

Your email address will not be published. Required fields are marked *