Fast delivery within 72 Hours

Wago 750-636/000-800

This module is a single‐channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback.Three 24 V inputs record the limit switches and a preset signal. An i…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This module is a single‐channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback.Three 24 V inputs record the limit switches and a preset signal. An incremental encoder interface evaluates signals from the position sensor and determines the actual value.Where required, positioning optimizes the initial switching position as a function of direction, taking into account compensation for gearing backlash.Bidirectional control of the DC motor is implemented via a short-circuit-proof, temperature-monitored H-bridge. Both switched operation and soft start/stop or current reduction are possible via PWM control. The field-side 24 V supply voltage from the power contacts, which is monitored for undervoltage/overvoltage events, is looped through to adjacent modules.The module can also be used as:a dedicated incremental encoder or as a switch and power controller (PWM).

Specification

Technical data

Number of digital inputs3
Number of outputs1 (A+; A-; H-bridge output)
Encoder connectionA, B, zero low-side switching; 5 … 24 VDC / open collector
Motor connectionA+, A-, H-bridge output; short-circuit-protected
Quadrature decoder1x, 2x, 4x evaluation
Input characteristichigh-side switching
Input characteristicType 1
Input current at specific input voltage-3.2 mA at 0.3 V
Input current at specific input voltage (2)0 mA bei 5 V
Input current (typ.)2.7 mA at 24 V
Output current (max.) (motor)5 A (15 A / 500 ms), short-circuit-protected
Current consumption, typ.2 mA (UA)
Voltage range for signal (0)−3 … +1.5 VDC
Voltage range for signal (1)2.4 … 30 VDC
PWM frequency (typ.)20 kHz
Data width32-bit set/actual value; 16-bit control or status
Limit frequency50 kHz
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)55 mA
Supply voltage (field)24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Current consumption, field supply (module with no external load)10 mA
Isolation500 V system/field
IndicatorsLED (A-D) green: End Position +, End Position -, Preset, 24 V OK; LED (E, F) yellow: PWM Current Limitation, Position OK; LED (G, H) red: Reserved, Operating Fault
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.713 MJ
Weight55 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistancePer IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61000-6-2
EMC emission of interferenceper EN 61000-6-3
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4050821868651
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-05
eCl@ss 9.027-24-26-05
ETIM 9.0EC001601
ETIM 10.0EC001601
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1, 79-94-7
REACH Candidate List Substance2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)7b2f880d-5abb-4d21-b999-52876747d621
SCIP notification number (Belgium)bbd15ea1-2e6f-404d-b7d0-04522904347d
SCIP notification number (Bulgaria)1aacb75b-3eed-426c-9ee1-7426e018ce11
SCIP notification number (Czech Republic)33ea5e8d-03df-4b14-9123-98910754925a
SCIP notification number (Denmark)d3559eac-f950-4996-988e-7fbee28d9480
SCIP notification number (Finland)35af9259-b524-4d0f-899f-4773f714bccc
SCIP notification number (France)b445b47b-665c-431a-925c-b0306eaeeb73
SCIP notification number (Germany)d587ca6d-eb2a-4b84-9453-9b36427568cb
SCIP notification number (Hungary)50072551-f80e-4a14-945b-42905a4a543a
SCIP notification number (Italy)a30e1a29-eefa-46ed-9d1d-81c7756510af
SCIP notification number (Netherlands)4d928bce-c741-4c5f-b1e6-63f10ca28175
SCIP notification number (Poland)5c24d3d5-2753-4875-b36e-28ce66609149
SCIP notification number (Romania)e9ae6afa-f711-426e-a219-71e02dff063c
SCIP notification number (Sweden)3d381fc0-9196-41f5-bc26-d8a7ae3dce1d

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-636/000-800”

Your email address will not be published. Required fields are marked *