Fast delivery within 72 Hours

Wago 750-635

This digital impulse interface connects magnetostrictive position sensors equipped with a start/stop interface. After receiving a read pulse, these sensors deliver a time-delayed reply impulse. The ti…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This digital impulse interface connects magnetostrictive position sensors equipped with a start/stop interface. After receiving a read pulse, these sensors deliver a time-delayed reply impulse. The time delay is proportional to the sensor distance.Each sensor may have up to four position transmitters (permanent magnets). Their position data can be accessed serially by the controller and are stored in the process image of the fieldbus coupler as a 24-bit value.The parameterization of the ultrasonic speed and the transmission points is done via the control byte. The parameters can be changed during operation.The transmission of the impulses is done with RS-422 differential drivers which guarantees trouble-free data transmission.Position sensors with the following features can be used: Start/stop interface with RS-422 differential signals, 24 V sensor supply, manufacturer: e.g., Balluff

Specification

Technical data

Number of inputs1
Signal typeDifferential signal (RS-422)
Encoder connectionStart/stop; Initialization; Uv; Ground; Shield connection via encoder housing
Resolution1 µm
Update time (update rate)2 ms
Data width1 x 24-bit data 1 x 8-bit control/status
Position sensor length4 m
Hysteresis (precision)Depends on position sensor
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)45 mA
Supply voltage (field)24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Isolation500 V system/field
IndicatorsLED (A) green: function; LED (B) red: Error
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches
Connection requirement (permissible cable length)500 m
Connection requirement (permissible cable type)RS-422

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail62.6 mm / 2.465 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Colorlight gray
Housing materialPolycarbonate; polyamide 6.6
Fire load1.085 MJ
Weight49.9 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistancePer IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61000-6-2
EMC emission of interferenceper EN 61000-6-4
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4045454393984
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-05
eCl@ss 9.027-24-26-05
ETIM 9.0EC001601
ETIM 10.0EC001601
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-635”

Your email address will not be published. Required fields are marked *