Fast delivery within 72 Hours

Wago 750-563/040-000

This analog output module generates 0/4 … 20 mA output currents or 6 … 18 V output voltages for the field.Output ranges can be configured via WAGO‐I/O‐CHECK or GSD files.The module has two short circu…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This analog output module generates 0/4 … 20 mA output currents or 6 … 18 V output voltages for the field.Output ranges can be configured via WAGO‐I/O‐CHECK or GSD files.The module has two short circuit-proof output channels and enables direct connection of two 2-wire actuators to AO 1 and ground or AO2 and ground. Signals are output via AO 1 or AO 2. In addition, the sense lines from 4-wire actuators can be connected to -Sense AO1 and +Sense AO1 or -Sense AO2 and +Sense AO2.Both output channels have a common ground potential.The output signal is electrically isolated and transmitted with a resolution of 16 bits.Both internal system and field side supply power the module.The device is ideal for operation in extreme environments thanks to:An extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistance

Specification

Technical data

Number of analog outputs2
Total number of channels (module)2
Signal typeVoltage, Current
Signal type (current)0 … 20 mADC; 4 … 20 mADC
Signal type (voltage)6 … 18 VDC
Signal type (configurable)yes
Actuator connection2 x (2-wire, 4-wire)
Resolution [bit]16 Bit
Data width2 x 16-bit data; 2 x 8-bit control/status (optional)
Load impedance (voltage output)≥ 1.8 kΩ
Load impedance (current output)≤ 500 Ω
Conversion time (typ.)5 ms
Measurement error (reference temperature)25 °C
Measurement error, deviation (max.) from the upper-range value0.05 %
Output error, deviation (max.) of the upper-range value0.05 %
Temperature coefficient< ±100 ppm
Recovery time (typ.)0.3 ms
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)95 mA
Supply voltage (field)24 VDC (-15 … +30 %); via power jumper contacts (power supply via blade contact; transmission via spring contact); Derating must be observed!
Dielectric strength510 VAC / 775 VDC; per EN 60870-2-1
Rated impulse withstand voltage1 kV
IndicatorsLED (A, E) green: Function AO 1, AO 2; LED (C, G) red: Error AO 1, AO 2
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A
DeratingDerating (supply voltage):Ambient temperatures under laboratory conditions: (-25 … +30 %);for -40 … +55 °C: 24 V (min. … +20 %);for +55 … +70 °C: 24 V (min. … +10 %);Voltage range (min.): 21.6°V; Current range (min.): 20.4 V;Lower limit in all temperature ranges: -27.5 % (including 15 % residual ripple)

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/Outputs
Solid conductor0.25 … 2.5 mm² / 24 … 14 AWG
Fine-stranded conductor0.25 … 2.5 mm² / 24 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Colordark gray
Housing materialPolycarbonate; polyamide 6.6
Fire load0.945 MJ
Weight51 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)-40 … +70 °C
Ambient temperature (installation)-20 … +70 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitudewithout temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)
Mounting positionHorizontal left, horizontal up, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Relative humidity (with condensation)Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
Vibration resistanceAccording to type test for marine classification (ABS, BV, DNV, IACS, LR): acceleration: 5g, IEC 60068-2-6, EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373
Shock resistanceper IEC 60068-2-27 (10g/16 ms/half-sine/1,000 shocks; 25g/6 ms/half-sine/1,000 shocks), EN 50155, EN 61373
EMC immunity to interferenceper EN 61000-6-1, -2; EN 61131-2; marine applications; EN 50121-3-2; EN 50121-4, -5; EN 60255-26; EN 60870-2-1; EN 61850-3; IEC 61000-6-5; IEEE 1613; VDEW: 1994
EMC emission of interferenceper EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
Exposure to pollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typebox
Country of originDE
GTIN4050821460367
Customs tariff number85389099990

Product Classification

UNSPSC32101505
eCl@ss 10.027-24-26-01
eCl@ss 9.027-24-26-01
ETIM 9.0EC001596
ETIM 10.0EC001596
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide, Perfluorobutane sulfonic acid (PFBS) and its salts
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Bulgaria)2a246809-2460-4766-89bd-889f3cb114cc
SCIP notification number (Czech Republic)cb7b93d3-3e7d-4e64-8d5d-bf1944ebc38f

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-563/040-000”

Your email address will not be published. Required fields are marked *