Fast delivery within 72 Hours
Wago 750-535/040-000
This digital output module controls actuators operating in Zone 0+1 hazardous areas.Intrinsically safe magnetic valves can be directly controlled.The WAGO I/O System 750 XTR must be installed either i…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
This digital output module controls actuators operating in Zone 0+1 hazardous areas.Intrinsically safe magnetic valves can be directly controlled.The WAGO I/O System 750 XTR must be installed either in Zone 2 or in a non-hazardous area.All outputs are electronically short-circuit-protected.Indicators:Green LED (output status)Field and system levels are electrically isolated.The device is ideal for operation in extreme environments thanks to:An extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistance
Specification
Notes
| Note | The digital output module must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!General information on explosion protection, including installation regulations, can be found in the WAGO I/O System 750 XTR manuals! |
|---|
Technical data
| Item description | 2-Channel Digital Output; 24 VDC; Intrinsically safe |
|---|---|
| Number of digital outputs | 2 |
| Total number of channels (module) | 2 |
| Signal type | Digital |
| Signal type (voltage) | 24 VDC |
| Actuator connection | 2 x (2-wire) |
| Output characteristic | high-side switching |
| Switching frequency (max.) | 1 kHz |
| Load type | Resistive, inductive, lamp load |
| Internal resistance R<sub>i</sub> | 285 Ω |
| Intrinsically safe Ex i | Yes |
| Output data width (internal) max. | 2 Bit |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 7 mA |
| Supply voltage (field) | 24 VDC; (Ex i XTR power supply: Uo = max. 26.8 ); via power jumper contacts (supply via blade contact; distribution via spring contact) |
| Current consumption, field supply (module with no external load) | 8.5 mA |
| Power consumption P<sub>max.</sub> | 2.1 W (at 40 mA output current) |
| Power loss P<sub>l</sub> | 1.1 W (at 40 mA output current) |
| Isolation | 300 VAC system/supply |
| Rated impulse withstand voltage | 1 kV; Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11) |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity (power jumper contacts) | 1 A |
| Indicators | LED (A, E) green: Status DO 1, DO 2 |
Explosion protection
| Identification | ATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I, IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I, cULus (Devision classified): Class I, Div. 2, Group A B C D, T4 |
|---|---|
| Ex standard | EN/IEC 60079-0, -7, -11 |
| Safety-relevant data (circuit) | Uo = 26.8 V; Io = 99.91 mA; Po = 669.43 mW; linear characteristic curve |
| Reactances Ex ia IIC | Lo = 1.1 mH; Co = 0.092 µF |
| Reactances Ex ia IIB | Lo = 12 mH; Co = 0.72 µF |
| Reactances Ex ia IIA | Lo = 21 mH; Co = 2.37 µF |
| Reactances Ex ia I | Lo = 30 mH; Co = 3.85 µF |
| Reactances (note) | Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo) |
Connection data
| Connection technology: I/O | 4 x CAGE CLAMP® |
|---|---|
| Connectable conductor materials | Copper |
| Connection type | Inputs/outputs |
| Solid conductor | 0.25 … 2.5 mm² / 24 … 14 AWG |
| Fine-stranded conductor | 0.25 … 2.5 mm² / 24 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
| Width | 12 mm / 0.472 inches |
|---|---|
| Height | 100 mm / 3.937 inches |
| Depth | 67.8 mm / 2.669 inches |
| Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
| Mounting type | DIN-35 rail |
|---|
Material data
| Color | blue |
|---|---|
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 0.961 MJ |
| Weight | 47.5 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | -40 … +70 °C |
|---|---|
| Ambient temperature (storage) | -40 … +85 °C |
| Ambient temperature (installation) | -20 … +70 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.) |
| Mounting position | Horizontal left, horizontal up, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Relative humidity (with condensation) | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation) |
| Vibration resistance | Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3 |
| Shock resistance | per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 61373 |
| EMC immunity to interference | per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMC emission of interference | per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3 |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| PU (SPU) | 1 pcs |
|---|---|
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4055143649537 |
| Customs tariff number | 85371098990 |
Product Classification
| UNSPSC | 32151705 |
|---|---|
| eCl@ss 10.0 | 27-24-26-04 |
| eCl@ss 9.0 | 27-24-26-04 |
| ETIM 9.0 | EC001599 |
| ETIM 10.0 | EC001599 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1 |
|---|---|
| REACH Candidate List Substance | Diboron trioxide, Lead, Lead monoxide, Perfluorobutane sulfonic acid (PFBS) and its salts |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 0b2ceb78-ac81-4988-8b7a-377dc156a965 |
| SCIP notification number (Belgium) | 1635edb6-49e0-4123-9d28-88b169029d69 |
| SCIP notification number (Bulgaria) | ec71e56a-09f1-43b3-b4df-6147579683ee |
| SCIP notification number (Czech Republic) | 87752587-b81c-4481-adee-b573d8158335 |
| SCIP notification number (Denmark) | a5d00dfb-4d13-44d6-b0e7-6baa160ef3b7 |
| SCIP notification number (Finland) | 9d4f5f8b-2366-4d0d-84a4-6c980164823f |
| SCIP notification number (France) | 62124c86-10f3-426e-a127-9202e4418043 |
| SCIP notification number (Germany) | b0e931f6-15c4-4328-a13f-7dbffa6958d3 |
| SCIP notification number (Hungary) | 8958d882-e061-4dbf-afd5-0e394ba65148 |
| SCIP notification number (Italy) | 1432c57a-699b-484d-92ec-b05760073d33 |
| SCIP notification number (Netherlands) | d64dd8ec-bf74-4dcc-aa6e-829f429567c1 |
| SCIP notification number (Poland) | b8258447-9e0b-45a0-a4c8-bf7e7f9b0f5f |
| SCIP notification number (Romania) | b2241bbc-0406-48c7-839b-290bcb932ee0 |
| SCIP notification number (Sweden) | 36f6720f-0810-4ac9-8089-eeb446d85f48 |
Reviews
Clear filtersThere are no reviews yet.