Fast delivery within 72 Hours

Wago 750-528

This digital output module transmits control signals from the automation device to the connected actuators.The module has four semiconductor switches with very low on-resistance MOSFETs suitable for b…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This digital output module transmits control signals from the automation device to the connected actuators.The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required.The control of the semiconductor outputs is galvanically isolated from the internal system voltage. Furthermore, the output channels of the 750-528 I/O Module are also electrically isolated from each other.The field supply voltage is fed to the right-hand modules via the power contacts.The signal states for controlling the four digital outputs are indicated by status LEDs.Notice:If AC voltages are fed via the power contacts or DC voltages >31.2 V are used, a suitable supply module (e.g., 750-612) must be provided!

Specification

Technical data

Number of digital outputs4
Total number of channels (module)4
Signal typeDigital
Signal type (voltage)30 VAC/DC
Actuator connection4 x (2-wire)
Output characteristichigh-side switching
Output current per channel2 A
Output current (module)8 A
Output currentrequires external fuses
Load typeResistive; inductive (Limit induction voltage peaks externally.)
Contact resistance (max.)0.04 Ω
Contact resistance (typ.)0.02 Ω
Delay time T_on from 0 to 11000 µs
Delay time T_off from 1 to 020000 µs
Switching frequency (max.)1 Hz
Inductive load switch-off energy dissipation (max.)0.18 J
Output data width (internal) max.4 Bit
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)57 mA
Supply voltage (field)30 VAC/DC, SELV; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact)
Current consumption, field supply (module with no external load)0 mA
Isolation500 V system/field or channel/channel
IndicatorsLED (A, B, E, F) green: Status DO 1 … DO 4
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)10 A
Overvoltage categoryII

Connection data

Connection technology: I/O8 x CAGE CLAMP® (outputs)
Connectable conductor materialsCopper
Connection typeOutput
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width12 mm / 0.472 inches
Height100 mm / 3.937 inches
Depth69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail62.6 mm / 2.465 inches

Mechanical data

Mounting typeDIN-35 rail
Pluggable connectorfixed

Material data

Housing materialPolycarbonate; polyamide 6.6
Fire load0.713 MJ
Weight54 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-40 … +85 °C
Protection typeIP20
Protection classIII
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61000-6-1, -2; marine applications
EMC emission of interferenceper EN 61000-6-3, -4; marine applications
Exposure to pollutantsper IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4066966082524
Customs tariff number85371098990

Product Classification

UNSPSC32151705
ETIM 9.0EC001599
ETIM 10.0EC001599
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption7(c)-I, 6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)9780103d-4209-4063-9caa-ed782ef7f5b2
SCIP notification number (Belgium)ab88f967-2739-4bfe-acaa-0233dcab727a
SCIP notification number (Bulgaria)0b7de003-f985-4228-915a-a012e4496469
SCIP notification number (Czech Republic)b8200a71-6d91-43ec-9252-b9bafaf6e7c0
SCIP notification number (Denmark)3f6ad7ac-0a14-464a-80a0-e5404a50e251
SCIP notification number (Finland)c9e33524-b142-49a0-afee-7abbb270aa2f
SCIP notification number (France)a5128dc1-dd50-49fe-b632-661632365b42
SCIP notification number (Germany)c69938f2-30ac-4739-8953-765224cf5228
SCIP notification number (Hungary)83debe4d-8b07-46f6-b286-e9797b3ac8e4
SCIP notification number (Italy)34b13db9-bae6-4785-810a-23ba751084c0
SCIP notification number (Netherlands)43adf4c8-f135-4cf8-a8cc-704ad9092ca9
SCIP notification number (Poland)eaea6b07-1b20-49d8-9d07-97c9da9ad76d
SCIP notification number (Romania)af29cf77-e8da-44c6-9a01-10b6e6603529
SCIP notification number (Sweden)9e61c717-c9f8-40d9-948f-f3b256a6678f

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-528”

Your email address will not be published. Required fields are marked *