Fast delivery within 72 Hours
Wago 750-523
This relay module switches a connected actuator or load. The 24 VDC supply is derived from the power jumper contacts to trigger the relays.The switched status of the relay is shown by the manual switc…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
This relay module switches a connected actuator or load. The 24 VDC supply is derived from the power jumper contacts to trigger the relays.The switched status of the relay is shown by the manual switch (1/0). The operating mode can be set using a manual/automatic selector switch. The mode status is indicated by an LED and via status bits in the process image.Manual: Coil triggering is interrupted. Operation is only possible via the red manual operating switch.Auto: The relay is operated via the control system. Manual status changeover via manual operating switch is canceled by the control system in less than 500 ms.The manual switch can also be used without 24 V supply to switch the output ON.The relay meets both international standards of IEC and DIN EN 61810 part 1 /VDE 0435 part 201, as well as overload and short circuit requirements of IEC and DIN EN 61036 /61037.
Specification
Technical data
| Number of digital outputs | 1 |
|---|---|
| Total number of channels (module) | 1 |
| Signal type | Digital |
| Actuator connection | 1 x (1-wire) |
| Output circuit design | 1 make contact, Relay |
| Output characteristic | potential-free |
| Switching voltage (max.) | 440 VAC |
| Switching current (max.) | 16 A |
| Switching power | max. 5 kVA |
| Mechanical life | 106 |
| Input data width (internal) max. | 2 Bit |
| Output data width (internal) max. | 2 Bit |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 5 mA |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact) |
| Current consumption, field supply (module with no external load) | 80 mA |
| Isolation | 1500 V (system/field) |
| Indicators | LED yellow: Manual mode |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity (power jumper contacts) | 10 A |
Connection data
| Connection technology: I/O | 4 x CAGE CLAMP® (outputs) |
|---|---|
| Connectable conductor materials | Copper |
| Connection type | Output |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
| Width | 24 mm / 0.945 inches |
|---|---|
| Height | 100 mm / 3.937 inches |
| Depth | 67.8 mm / 2.669 inches |
| Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
| Mounting type | DIN-35 rail |
|---|---|
| Pluggable connector | fixed |
Material data
| Color | light gray |
|---|---|
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 2.077 MJ |
| Weight | 101.2 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | 0 … +55 °C |
|---|---|
| Ambient temperature (storage) | -40 … +85 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Vibration resistance | 4g per IEC 60068-2-6 |
| Shock resistance | 15g per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2, marine applications |
| EMC emission of interference | per EN 61000-6-3, marine applications |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| Product Group | 15 (I/O System) |
|---|---|
| PU (SPU) | 1 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4045454495428 |
| Customs tariff number | 85371098990 |
Product Classification
| UNSPSC | 39122334 |
|---|---|
| eCl@ss 10.0 | 27-24-26-04 |
| eCl@ss 9.0 | 27-24-26-04 |
| ETIM 9.0 | EC001599 |
| ETIM 10.0 | EC001599 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1, 79-94-7 |
|---|---|
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 7896f890-eea5-4c2f-be59-494360e0c875 |
| SCIP notification number (Belgium) | 310ed1f6-1c90-4a40-b3a3-528ee237032b |
| SCIP notification number (Bulgaria) | 25fe0bdb-607c-4238-8c3f-c1e020dfd678 |
| SCIP notification number (Czech Republic) | 0d22a6b8-d446-4ce8-a970-148852ada053 |
| SCIP notification number (Denmark) | 29a3259a-d00b-4b3d-a2be-23e115912ea2 |
| SCIP notification number (Finland) | ff6450bd-1acb-49b8-8483-3304819631d8 |
| SCIP notification number (France) | a4cd2bc1-7786-40aa-89bc-c8ceca5dd089 |
| SCIP notification number (Germany) | 98eda6a7-4c43-40a8-9c7b-c06cae038357 |
| SCIP notification number (Hungary) | 8e2f7d78-defe-4fb0-ae11-b8431979c52a |
| SCIP notification number (Italy) | 8920521c-c365-4137-9efb-19990f05b5cc |
| SCIP notification number (Netherlands) | 66e29eaa-0881-4d7b-b642-cf03b097d4ee |
| SCIP notification number (Poland) | ea3fb37b-afca-4e9d-8d83-f4dd28f9c5ab |
| SCIP notification number (Romania) | 2c87f391-0175-4c9e-88cc-b9dc97021b8e |
| SCIP notification number (Sweden) | 56e1323f-ff8f-487f-83a7-37ab0e17dbc8 |
Reviews
Clear filtersThere are no reviews yet.