Fast delivery within 72 Hours

Wago 750-485

This analog input module supplies intrinsically safe signal conditioners in hazardous areas classified as Zone 0 and Zone 1, and processes their analog measurement signals.The WAGO I/O System 750/753…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This analog input module supplies intrinsically safe signal conditioners in hazardous areas classified as Zone 0 and Zone 1, and processes their analog measurement signals.The WAGO I/O System 750/753 must be installed either in Zone 2 or in a non-hazardous area.The 24 V supply voltage is fed in via the power jumper contacts.The transmitter power supply is conditionally short-circuit protected.The shield connection directly connects to the DIN-rail.Indicators:Green LED (signal current on/off)Red LED (wire breakage, measurement range overflow/underflow)Field and system levels are electrically isolated.

Specification

Notes

NoteThe analog output module must only be operated with a 24 VDC Ex i power supply!General information on explosion protection, including installation regulations, can be found in the WAGO I/O System 750/753 manuals!

Technical data

Item description2-Channel Analog Input; 4 … 20 mA
Number of analog inputs2
Total number of channels (module)2
Signal typeCurrent
Signal type (current)4 … 20 mADC
Sensor connection2 x (3-wire)
Signal characteristicsSingle-ended
Sensor supply16 VDC
Resolution [bit]12 Bit
Conversion time (typ.)2 ms
Measurement error (reference temperature)25 °C
Measurement error, deviation (max.) from the upper-range value±0.2 %
Temperature error (max.) of the upper-range value±0.01 %/K
Input resistance (max.)100 Ω
Intrinsically safe Ex iYes
Data width2 x 16-bit data; 2 x 8-bit control/status (optional)
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)31 mA
Supply voltage (field)24 VDC; (Ex i power supply: Uo = max. 26.8 V); via power jumper contacts (supply via blade contact; distribution via spring contact)
Current consumption, field supply (module with no external load)11 mA
Power consumption P<sub>max.</sub>1.3 W
Power loss P<sub>l</sub>0.75 W
Isolation300 VAC system/supply
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
IndicatorsLED (A, E) green: Function AI 1, AI 2; LED (B, F) red: Error AI 1, AI 2

Explosion protection

IdentificationATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I, IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I, cULus (Zone classified): Cl I Zn 2 AEx nA [ia Ga] IIC T4 Gc; Cl I Zn 2 AEx nA [ia IIIC] IIC T4 Gc; Ex nA [ia Ga] IIC T4 Gc X; Ex nA [ia IIIC] IIC T4 Gc X, cULus (Devision classified): Class I, Div. 2, Group A B C D, T4
Ex standardEN IEC 60079-0, -7, -11
Safety-relevant data (circuit)Uo = 26.8 V; Io = 88.4 mA; Po = 593 mW; linear characteristic curve
Reactances Ex ia IICLo = 4.54 mH; Co = 92 nF
Reactances Ex ia IIBLo = 18.19 mH; Co = 720 nF
Reactances Ex ia IIALo = 36.39 mH; Co = 2.37 μF
Reactances Ex ia ILo = 59.71 mH; Co = 4.2 µF
Reactances (note)Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)

Connection data

Connection technology: I/O8 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/outputs
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width24 mm / 0.945 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Colorblue
Housing materialPolycarbonate; polyamide 6.6
Fire load2.325 MJ
Weight97.6 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)0 … +55 °C
Ambient temperature (storage)-25 … +85 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitude0 … 2000 m / 0 … 6562 ft
Mounting positionHorizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Vibration resistance4g per IEC 60068-2-6
Shock resistance15g per IEC 60068-2-27
EMC immunity to interferenceper EN 61000-6-2, marine applications
EMC emission of interferenceper EN 61000-6-3, marine applications
Exposure to pollutantsper IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

Product Group15 (I/O System)
PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4045454725556
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-01
eCl@ss 9.027-24-26-01
ETIM 9.0EC001596
ETIM 10.0EC001596
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Bulgaria)5065582b-f270-43af-9e74-f9e23017a7b1
SCIP notification number (Czech Republic)0170611b-8bdf-4c42-9ac1-72bd32bec088

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-485”

Your email address will not be published. Required fields are marked *