Fast delivery within 72 Hours

Wago 750-481/040-000

This analog input module directly connects to Pt and Ni resistance temperature detectors (RTDs) or potentiometers installed in hazardous areas classified as Zone 0 and Zone 1.The WAGO I/O System 750 X…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

This analog input module directly connects to Pt and Ni resistance temperature detectors (RTDs) or potentiometers installed in hazardous areas classified as Zone 0 and Zone 1.The WAGO I/O System 750 XTR must be installed either in Zone 2 or in a non-hazardous area. The 24 V supply voltage is fed in via the power jumper contacts.The shield connection directly connects to the DIN-rail.Indicators:Green LED (availability ON/OFF)Red LED (short circuit, wire breakage, measurement range overflow/underflow)Field and system levels are electrically isolated.The device is ideal for operation in extreme environments thanks to:An extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistance

Specification

Notes

NoteThe analog output module must only be operated with a 24 VDC Ex i XTR power supply (750-606/040-000)!General information on explosion protection, including installation regulations, can be found in the WAGO I/O System 750 XTR manuals!

Technical data

Item description2-Channel Analog Input; RTD; Intrinsically safe
Number of analog inputs2
Total number of channels (module)2
Signal typeResistance measurement, Potentiometer positions
Signal type (configurable)Yes
Sensor connection2 x (2-wire, 3-wire)
Sensor typesPt100; Configurable: Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000; Resistors: 1.2 kΩ, 5 kΩ; Potentiometer setting 0 … 100 %: 1k2, 5k0
Temperature range−200 … +850 °C (Pt), −60 … +250 °C (Ni), −80 … +320 °C (Ni120)
Resolution (over entire range)0.1 °C, 0.1 Ω, 0.0049 %
Conversion time (typ.)325 ms
Conversion time150 … 500 ms (per channel)
Measurement error (reference temperature)25 °C
Measurement error, deviation (max.) from the upper-range value0.2 %
Temperature error (max.) of the upper-range value0.01 %/K
Measuring current (typ.)< 0.5 mA
Intrinsically safe Ex iYes
Data width2 x 16-bit data; 2 x 8-bit control/status (optional)
Supply voltage (system)5 VDC; via data contacts
Current consumption (5 V system supply)25 mA
Supply voltage (field)24 VDC; (Ex i XTR power supply: Uo = max. 26.8 ); via power jumper contacts (supply via blade contact; distribution via spring contact)
Current consumption, field supply (module with no external load)12 mA
Power consumption P<sub>max.</sub>0.45 W
Power loss P<sub>l</sub>0.45 W
Isolation300 VAC system/supply
Rated impulse withstand voltage1 kV; Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)
Number of incoming power jumper contacts2
Number of outgoing power jumper contacts2
Current carrying capacity (power jumper contacts)1 A
IndicatorsLED (A, E) green: Function AI 1, AI 2; LED (B, F) red: Error AI 1, AI 2

Explosion protection

IdentificationATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I, IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I, cULus (Devision classified): Class I, Div. 2, Group A B C D, T4
Ex standardEN/IEC 60079-0, -7, -11
Safety-relevant data (circuit)Uo = 7.2 V; Io = 5.8 mA; Po = 10.5 mW; linear characteristic curve
Reactances Ex ia IICLo = 100 mH; Co = 13.5 µF
Reactances Ex ia IIBLo = 100 mH; Co = 240 µF
Reactances Ex ia IIALo = 100 mH; Co = 1000 µF
Reactances Ex ia ILo = 100 mH; Co = 1000 µF
Reactances (note)Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)

Connection data

Connection technology: I/O16 x CAGE CLAMP®
Connectable conductor materialsCopper
Connection typeInputs/outputs
Solid conductor0.25 … 2.5 mm² / 24 … 14 AWG
Fine-stranded conductor0.25 … 2.5 mm² / 24 … 14 AWG
Strip length8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width24 mm / 0.945 inches
Height100 mm / 3.937 inches
Depth67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail60.6 mm / 2.386 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Colorblue
Housing materialPolycarbonate; polyamide 6.6
Fire load1.977 MJ
Weight90.6 g
Conformity markingCE

Environmental requirements

Ambient temperature (operation)-40 … +70 °C
Ambient temperature (storage)-40 … +85 °C
Ambient temperature (installation)-20 … +70 °C
Protection typeIP20
Pollution degree2 per IEC 61131-2
Operating altitudewithout temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)
Mounting positionHorizontal left, horizontal up, vertical top and vertical bottom
Relative humidity (without condensation)95 %
Relative humidity (with condensation)Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
Vibration resistancePer IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3
Shock resistanceper IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 61373
EMC immunity to interferenceper EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
EMC emission of interferenceper EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3
Exposure to pollutantsper IEC 60068-2-42 and IEC 60068-2-43
Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 %10 ppm
Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 %25 ppm

Commercial data

PU (SPU)1 pcs
Packaging typeBox
Country of originDE
GTIN4055143649445
Customs tariff number85389099990

Product Classification

UNSPSC32151705
eCl@ss 10.027-24-26-01
eCl@ss 9.027-24-26-01
ETIM 9.0EC001596
ETIM 10.0EC001596
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide, Perfluorobutane sulfonic acid (PFBS) and its salts
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)69e81412-7b1f-4ad9-bf99-324ec73f5c21
SCIP notification number (Belgium)d1201416-d700-4aab-9998-1d986401d885
SCIP notification number (Bulgaria)1e1c4243-a2b4-4645-ad01-d3e350520b71
SCIP notification number (Czech Republic)c87ac4cc-246c-4236-ab0a-be343e58f7d5
SCIP notification number (Denmark)8beb13e2-fc9b-4c82-9d05-f687a5526bf8
SCIP notification number (Finland)915940d0-4d33-4399-9cc2-7c89de393f76
SCIP notification number (France)43470cc2-d60a-423c-9a26-19cbd26382d1
SCIP notification number (Germany)385f94b6-2d8e-4451-8b7e-603188ae74c2
SCIP notification number (Hungary)863c8d28-45cf-4c07-9682-16522b95ab23
SCIP notification number (Italy)89aec051-113c-4b78-81bf-1ca21d0323c8
SCIP notification number (Netherlands)299766a5-9ef5-45f1-a4dd-a2da43ed7821
SCIP notification number (Poland)a56b6acb-8420-4b79-bf8d-49d704479e66
SCIP notification number (Romania)45c935fb-bf60-4fc8-a393-c96d76f8ee6c
SCIP notification number (Sweden)78d77221-f829-4b50-aff8-928ccfe8ee2b

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 750-481/040-000”

Your email address will not be published. Required fields are marked *