Fast delivery within 72 Hours

Wago 2857-535

Short description:WAGO’s RTD TC temperature signal conditioner for RTD sensors, potentiometers, resistors and thermocouples monitors and reports signals for up to two switching thresholds. The sensor…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Short description:WAGO’s RTD TC temperature signal conditioner for RTD sensors, potentiometers, resistors and thermocouples monitors and reports signals for up to two switching thresholds. The sensor and status information that is collected is also converted to a standard analog signal.Features:A relay with changeover contact reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values).Configurable Pt factorAdjustable software filterInput of customer-specific sensors via the interface configuration softwareSafe 3-way isolation with 3 kV test voltage per EN 61010-1Analog unipolar/bipolar signals (current/voltage) at outputAdditional digital signal output for configured measurement range limitsAdjustable transfer characteristic

Specification

Notes

NoteThis product is powered by 24 VDC, which can be bridged using lateral push-in type jumper bars: (6.1) US+ (BR) and (6.2) GND 2 (BR). With this variant, it is important to ensure that the maximum permissible total current of 1 A is not exceeded.

Technical data - Configuration

Configuration optionsWAGO Interface Configuration Software

Technical data - Input

Input signal typeRTD sensors, Potentiometer, Resistance, TC sensors

Technical data - Input (RTD sensors)

Sensor types (RTD)Pt10 … Pt2000 (expandable)
Sensor connection2-wire; 3-wire; 4-wire; differential; potentiometer
Sensor power supply (RTD) max.≤ 0.5 mA
Temperature measurement range (RTD)−200 … +850 °C
Measurement span (RTD) min.50 K

Technical data - Input (TC sensors)

Sensor types (TC)Type J, Type K, Type E, Type R, Type N, Type S, Type T, Type B, Type C
Temperature measurement range (TC)−200 … 1200 °C (Type J), −200 … 1372 °C (Type K), −200 … 1000 °C (Type E), 250 … 1768 °C (Type R), −200 … 1300 °C (Type N), −50 … 1664 °C (Type S), −200 … 400 °C (Type T), 250 … 1820 °C (Type B), 0 … 2320 °C (Type C)
Measurement span (TC) min.100 K
Cold junction compensationON/OFF (default: ON)
Cold junction error3 K (typ. 2 K )

Technical data - Input (resistors)

Input range (resistor)0 … 10 kΩ
Input range (potentiometer)0 … 10 kΩ
Measurement span (min.)50 Ω

Technical data - Output (analog)

Output signal typeCurrent, Voltage
Output signal (voltage)±12 V
Output signal (current)±24 mA
Load impedance (voltage output)≥ 2 kΩ
Load impedance (current output)≤ 600 Ω

Technical data - Output (digital)

Switching voltage (DO) max.Applied supply voltage − 0.3 V
Continuous current (DO) max.100 mA (no internal restriction)
Number of switching thresholds (DO)1 or 2 (adjustable)
Configurable rise/fall delay time (DO)0 … 60 s (via software)

Technical data - Output (relay)

Dielectric strength (open contact) (AC, 1 min)1 kV<sub>eff</sub>
Number of changeover/switchover contacts1
Switching Voltage, Max.250 VAC
Dielectric strength (open contact) (AC, 1 min)1 kVrms
Number of switching thresholds (relay)1 or 2 (adjustable)
Configurable rise/fall delay time (relay)0 … 60 s (via software)

Technical data - Signal processing

Software filter (adjustable)Moving average value (filter level: 30)
Step response (typ.)130 ms (2-wire), 700 ms (3-wire), 700 ms (4-wire), 600 ms (difference), 500 ms (potentiometer), 150 ms (cold junction compensation off), 400 ms (cold junction compensation on)

Technical data - Measurement error

Transmission error (typ.)≤ 0.1 % at full measurement span
Transmission error for the set measurement range≤ (100 K/set measurement range [K]) %
Temperature coefficient≤ 0.01 %/K

Technical data - Power supply

Power supply type24 VDC
Nominal supply voltage U<sub>S</sub>24 VDC
Supply voltage range-60 … +30 %
Current consumption at nominal supply voltage≤ 70 mA (+ IDO)

Safety and protection

Rated voltage300 V
Rated voltage of the measurement circuit connections per EN 61010-2-030AC 300 V
Measurement category per EN/UL 61010-2-030CAT II (input)
Note on insulation parametersThe digital output (DO) operates at the supply potential. The service interface operates at the potential of the analog output. The DIN-rail contact (functional ground) is capacitively coupled to the analog output.
Protection typeIP20

Safety and protection - Test voltage

Test voltage (input/output/supply)3 kVAC; 50 Hz; 1 min
Test voltage (input/analog output/relay output/supply)3 kVAC; 50 … 60 Hz; 1 min
Test voltage (input/DIN-rail contact/relay output/supply)3 kVAC; 50 … 60 Hz; 1 min

Safety and protection - Insulation coordination (UL)

Overvoltage categoryII
Pollution degree2
Insulation type (input/analog output/relay output/supply)Reinforced insulation (safe isolation)
Insulation type (input/DIN-rail contact/relay output/supply)Reinforced insulation (safe isolation)

Connection data

Connection technologyPush-in CAGE CLAMP®
WAGO connectorpicoMAX® 5.0
Solid conductor0.2 … 2.5 mm² / 24 … 12 AWG
Fine-stranded conductor0.2 … 2.5 mm² / 24 … 12 AWG
Strip length9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width22.5 mm / 0.886 inches
Height110 mm / 4.331 inches
Depth from upper-edge of DIN-rail107 mm / 4.213 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Fire load2.158 MJ
Weight126.7 g

Environmental requirements

Pollution degree2
Ambient temperature (operation)-40 … +70 °C
Ambient temperature (storage)-40 … +85 °C
Temperature range of connection cable≥ (Tambient + 10 K)
Temperature range of the connection cable (UL)85 °C
Relative humidity5 … 95 % (non-condensing)
Operating altitude (max.)2000 m

Standards and specifications

Conformity markingCE
EMC immunity to interferenceEN 61000-6-2; EN 61326-2-3
EMC emission of interferenceEN 61000-6-3; EN 61326-2-3
Standards/specificationsEN 61010-1, EN 61373

Commercial data

PU (SPU)1 pcs
Packaging typebag
Country of originDE
GTIN4055143655507
Customs tariff number85437090300

Product Classification

UNSPSC41113630
eCl@ss 10.027-21-01-29
eCl@ss 9.027-21-01-29
ETIM 9.0EC002919
ETIM 10.0EC002919
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8, 79-94-7
REACH Candidate List Substance2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide, Perfluorobutane sulfonic acid (PFBS) and its salts, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)-
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)beac9352-aef0-42a2-b7f0-a83392390cff
SCIP notification number (Belgium)eeb9df68-9e28-4e3e-92ac-8ef9ab87c305
SCIP notification number (Bulgaria)61e19286-b116-40e0-90e0-0d98747b35c6
SCIP notification number (Czech Republic)ccfdefc9-f0b3-4620-b412-b6adce9425b4
SCIP notification number (Denmark)1d7e7fd7-5fa4-47bb-96ed-30ae8a6161f6
SCIP notification number (Finland)4e130f44-9148-4325-97d7-6d58f5d97835
SCIP notification number (France)30e01dd3-5b6f-498f-9b37-54a0502b9f9e
SCIP notification number (Germany)ef2b2ca0-d8d7-4e0c-81db-287ee7497471
SCIP notification number (Hungary)93a905b5-7155-4b52-8695-61a9c5ddcc08
SCIP notification number (Italy)7a1074e6-72fb-4fec-bfaa-c1cebf85968f
SCIP notification number (Netherlands)e6753189-be82-47d8-93e5-8cabc3e2d142
SCIP notification number (Poland)91684334-ada5-46cb-8352-31567b986a40
SCIP notification number (Romania)9a8786ac-ee1e-477b-8851-a03a87e77e4a
SCIP notification number (Sweden)b9aa1443-ef24-4f0e-a0f8-b04a5d1a7f4f

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Wago 2857-535”

Your email address will not be published. Required fields are marked *