Fast delivery within 72 Hours
B&R X90DSI00.04-00
18 to 30 VDC4 IO-Link devices4 digital channels, can be used as inputs or outputsSensor/actuator power supplyNetTime timestamps: IO-Link dataX2X LinkThe DS option board is an IO-Link master that allow…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
18 to 30 VDC4 IO-Link devices4 digital channels, can be used as inputs or outputsSensor/actuator power supplyNetTime timestamps: IO-Link dataX2X LinkThe DS option board is an IO-Link master that allows intelligent sensors and actuators to be connected per the IO-Link standard. Communication to the mainboard is made possible via X2X Link.
Specification
| I/O module | IO-Link master with 4 IO-Link interfaces |
|---|---|
| B&R ID code | 0xF9F7 |
| Status indicators | – |
| Module run/error | Yes, using software status |
| Internal I/O | 0.6 W |
| Additional power dissipation caused by actuators (resistive) [W] | – |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.3 A | Max. 0.3 V |
| Power consumption | Max. 12 W per IO-Link interface |
| Short-circuit proof | Yes |
| Switch-off delay | Configurable using software |
| Switch-off duration | Configurable using software |
| COM1 | 4.8 kbaud |
| COM2 | 38.4 kbaud |
| COM3 | 230.4 kbaud |
| Max. connection capacity | 22 nF (cable + IO-Link device) |
| Max. load | 96 Ω / 250 mA |
| Data format | 1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit |
| Bus level | 24 VDC (active), 0 VDC (resting voltage) |
| Variant | Bipolar, positive and negative switching |
| Peak short-circuit current | <1.3 A |
| Residual voltage | <0.7 VDC at nominal current 0.25 A |
| Switching voltage | I/O power supply minus voltage drop for short-circuit protection and semiconductor switch |
| Voltage drop on semiconductor switch | Max. 0.44 VDC at 0.2 A |
| Switching frequency | Typ. 25 kHz 300 kHz in IO-Link master mode |
| 0 → 1 | <1 µs |
| 1 → 0 | <1 µs |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Configurable with software |
| Nominal voltage | 24 VDC |
| Nominal output current | 0.25 A |
| Total nominal current | Max. 1 A |
| Output circuit | Sink or source |
| Switching frequency (resistive load) | Max. 500 Hz |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Input characteristics per EN 61131-2 | Type 1 |
| Hardware | 220 ns |
| Software | 3 µs (without glitch filter) 4.2 µs (with glitch filter) |
| Input circuit | Sink |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Typ. 5.8 mA |
| Input resistance | Typ. 4.14 kΩ |
| Low | <5 VDC |
| High | >15 VDC |
| Electrical isolation | Bus isolated from IO-Link IO-Link not isolated from IO-Link |
| Any | Yes |
| Degree of protection per EN 60529 | Up to IP69K |
| Storage | 5 to 100%, condensing |
| Transport | 5 to 100%, condensing |
| Operation | 5 to 100%, condensing |
| Width | 47 mm |
| Length | 95 mm |
Reviews
Clear filtersThere are no reviews yet.