Fast delivery within 72 Hours

B&R X67DS838A.L12

8 IO-Link channels (port class A)Each IO-Link channel can be configured as a digital input or output (SIO mode)Additional digital input per IO-Link connection24 VDC and GND for sensor/actuator power s…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

8 IO-Link channels (port class A)Each IO-Link channel can be configured as a digital input or output (SIO mode)Additional digital input per IO-Link connection24 VDC and GND for sensor/actuator power supplyNetTime timestamps: IO-Link data

The module is an IO-Link master that allows intelligent sensors and actuators to be connected per the IO-Link standard. The module can operate up to 8 IO-Link devices. All IO-Link channels can also be operated in SIO mode and thus used as digital inputs or outputs. The module is also equipped with 8 additional digital inputs that can be used independently of the configuration of the IO-Link channels.

Specification

I/O moduleIO-Link master with 8 IO-Link interfaces
B&R ID code0x2DB9
Status indicatorsIO-Link operating state, bus function, module status
Module run/errorYes, using LED status indicator and software
C/Q statusYes, using LED status indicator and software
I/Q statusYes, using LED status indicator and software
InputsM12, A-coded
I/O power supplyM8, 4-pin
Cable type4-pin sensor cable, unshielded
Cable lengthMax. 20 m
Line capacitanceMax. 3 nF
Loop resistanceMax. 6 Ω
Internal I/O0.8 W
Additional power dissipation caused by actuators (resistive) [W]
CEYes
UKCAYes
CRA (Cyber Resilience Act)In preparation
ULcTÜV SÜDus No. U10 041745 0020 Per UL 61010-2-201
Nominal voltage24 VDC
Voltage range24 VDC ±25%
Integrated protective functionReverse polarity protection
VoltageI/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 AMax. 0.3 V
Power consumptionMax. 12 W per IO-Link interface
Short-circuit proofYes
Switch-off delayConfigurable using software
Switch-off durationConfigurable using software
COM14.8 kbaud
COM238.4 kbaud
COM3230.4 kbaud
Max. connection capacity22 nF (cable + IO-Link device)
Max. load96 Ω / 250 mA
Data format1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit
Bus level24 VDC (active), 0 VDC (resting voltage)
VariantBipolar, positive and negative switching
Peak short-circuit current<1.3 A
Residual voltage<0.7 VDC at nominal current 0.25 A
Switching voltageI/O power supply minus voltage drop for short-circuit protection and semiconductor switch
Voltage drop on semiconductor switchMax. 0.5 VDC at 0.25 A
0 → 1<10 µs
1 → 0<10 µs
Overcurrent thresholdConfigurable using software
Nominal output current0.25 A
Total nominal current with actuator power supplyMax. 4 A
Output circuitSink or source
Switching frequency (resistive load)Max. 500 Hz
Output protectionThermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
Hardware≤60 µs
Input circuitSink
Input voltage24 VDC -15% / +20%
Input current at 24 VDCTyp. 3.6 mA
Input resistanceTyp. 6.3 kΩ
Low<5 VDC
High>15 VDC
SoftwareDefault 1 ms, configurable between 0 and 25.5 ms
Electrical isolationBus isolated from IO-Link
AnyYes
0 to 2000 mNo limitation
>2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP67
Operation5 to 95%
Storage5 to 95%
Transport5 to 95%
Width53 mm
Height155 mm
Depth42 mm
Weight450 g
M8Max. 0.4 Nm
M12Max. 0.6 Nm

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R X67DS838A.L12”

Your email address will not be published. Required fields are marked *