Fast delivery within 72 Hours

B&R X67DM9331.L12

 274,54

5 in stock

8 digital channels, configurable as inputs or outputsOutputs can handle up to 2 ANode number switches for setting the X2X Link addressReplacement of passive distributorsAll outputs with single-channel…

5 in stock

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

8 digital channels, configurable as inputs or outputsOutputs can handle up to 2 ANode number switches for setting the X2X Link addressReplacement of passive distributorsAll outputs with single-channel diagnosticsExtensive additional status information

This module is equipped with 8 digital channels that can be configured either as inputs or outputs. The inputs are designed for a sink circuit, and the outputs are designed for a source circuit. The outputs can be loaded with up to 2 A. The summation current is 8 A.The node number switch for setting the X2X Link address is a unique feature. When modular machine configurations change, it is required, for example, to define certain module groups at a fixed address that is independent of the preceding modules in the line. All subsequent standard modules refer to this offset and use it automatically for addressing purposes.

Specification

I/O module8 digital channels, configurable as inputs or outputs using software
Insulation voltage between channel and bus500 Veff
Nominal voltage24 VDC
B&R ID code0x1B15
Sensor/Actuator current0.1 A
Summation currentMax. 0.5 A
Status indicatorsI/O function per channel, sensor/actuator power supply per channel, supply voltage, bus function
OutputsYes, using LED status indicator and software
I/O power supplyM8, 4-pin
Sensor/Actuator power supplyMax. 12 W
Inputs/Outputs8x M12, A-coded
Internal I/O1.7 W
CEYes
UKCAYes
CRA (Cyber Resilience Act)In preparation
ATEXZone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X
ULcULus E115267 Industrial control equipment
HazLoccCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
KCYes
Voltage range18 to 30 VDC
Integrated protective functionReverse polarity protection
VoltageI/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 AMax. 2 VDC
Short-circuit proofYes
Input characteristics per EN 61131-2Type 1
Input voltage18 to 30 VDC
Input current at 24 VDCTyp. 4.4 mA
Input circuitSink
Hardware≤70 μs
SoftwareDefault 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals
Input resistanceTyp. 5 kΩ
Low<5 VDC
High>15 VDC
VariantCurrent-sourcing FET
Switching voltageI/O power supply minus residual voltage
Nominal output current2 A
Total nominal current8 A
Output circuitSource
Output protectionThermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Diagnostic statusOutput monitoring with 10 ms delay
Leakage current when the output is switched off5 µA
Switching on after overload shutdownApprox. 10 ms (depends on the module temperature)
Residual voltage<0.5 V at 2 A nominal current
Peak short-circuit current<21 A
0 → 1<250 µs
1 → 0<270 µs
Resistive loadMax. 100 Hz
Braking voltage when switching off inductive loads50 VDC
Electrical isolationChannel isolated from bus Channel not isolated from channel
AnyYes
0 to 2000 mNo limitation
>2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP67
Operation-25 to 60°C
Derating
Storage-40 to 85°C
Transport-40 to 85°C
Width53 mm
Height155 mm
Depth42 mm
Weight325 g
M8Max. 0.4 Nm
M12Max. 0.6 Nm

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R X67DM9331.L12”

Your email address will not be published. Required fields are marked *