Fast delivery within 72 Hours

B&R X67DM1321.L12

Price range: € 270,30 through € 422,94

16 digital channels, configurable as inputs or outputsReplacement of passive distributors2 additional channels with counter functionsAll outputs with single-channel diagnosticsExtensive additional sta…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

16 digital channels, configurable as inputs or outputsReplacement of passive distributors2 additional channels with counter functionsAll outputs with single-channel diagnosticsExtensive additional status information

This module is equipped with 16 digital channels that can be configured either as inputs or outputs. The inputs are designed for a sink circuit, and the outputs are designed for a source circuit.

Specification

I/O module16 digital channels, configurable as inputs or outputs using software, inputs with additional functions
Insulation voltage between channel and bus500 Veff
Nominal voltage24 VDC
B&R ID code0x1A1D
Sensor/Actuator power supplyMax. 12 W
Status indicatorsI/O function per channel, supply voltage, bus function
OutputsYes, using LED status indicator and software
I/O power supplyM8, 4-pin
Inputs/Outputs8x M12, A-coded
Internal I/O3 W
CEYes
UKCAYes
CRA (Cyber Resilience Act)In preparation
ATEXZone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X
ULcULus E115267 Industrial control equipment
HazLoccCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
KCYes
Voltage range18 to 30 VDC
Integrated protective functionReverse polarity protection
VoltageI/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 AMax. 2 VDC
Summation currentMax. 0.5 A
Short-circuit proofYes
Input characteristics per EN 61131-2Type 1
Input voltage18 to 30 VDC
Input current at 24 VDCTyp. 4.4 mA
Input circuitSink
Hardware≤10 μs (channels 1 to 4) / ≤70 µs (channels 5 to 16)
SoftwareDefault 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals
Input resistanceTyp. 5 kΩ
Additional functions50 kHz event counting, gate measurement
Low<5 VDC
High>15 VDC
Quantity1
Signal formSquare wave pulse
EvaluationPositive edge – Negative edge
Input frequencyMax. 50 kHz
Counter 1Input 1
Counter 2Input 3
Counter frequencyMax. 50 kHz
Counter size16-bit
Internal48 MHz, 3 MHz, 187.5 kHz
Length of pause between pulses≥100 µs
Pulse length≥20 µs
Supported inputsInput 2 or input 4
VariantCurrent-sourcing FET
Switching voltageI/O power supply minus residual voltage
Nominal output current0.5 A
Total nominal current8 A
Output circuitSource
Output protectionThermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Diagnostic statusOutput monitoring with 10 ms delay
Leakage current when the output is switched off5 µA
Switching on after overload shutdownApprox. 10 ms (depends on the module temperature)
Residual voltage<0.3 V at 0.5 A nominal current
Peak short-circuit current<12 A
0 → 1<400 µs
1 → 0<400 µs
Resistive loadMax. 100 Hz
Braking voltage when switching off inductive loads50 VDC
Electrical isolationChannel isolated from bus Channel not isolated from channel
AnyYes
0 to 2000 mNo limitation
>2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP67
Operation-25 to 60°C
Derating
Storage-40 to 85°C
Transport-40 to 85°C
Width53 mm
Height155 mm
Depth42 mm
Weight320 g
M8Max. 0.4 Nm
M12Max. 0.6 Nm
ConditionNew, Used
RevisionRev. E0, Rev. K0, Rev. N0

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R X67DM1321.L12”

Your email address will not be published. Required fields are marked *