Wago 2624-3307

PCB terminal block, 2624 Series, with 7.5 mm pin spacingThis PCB terminal block (item number 2624-3307) streamlines wire connections, making them both quick and easy. It offers the flexibility needed for different mounting types. Our PCB terminal block is rated for 1000 V and is designed for use with a rated current of up to 41 A. It can therefore be used in high-load applications. Conductors should only be connected to this PCB terminal block if their strip length is between 10 mm and 12 mm. This product incorporates one conductor terminal and utilizes Push-in CAGE CLAMP®. Push-in CAGE CLAMP® connection technology is ideal for connecting all conductor types. It allows direct insertion of both solid and fine-stranded conductors with ferrules without needing to use any tools—all thanks to its pluggable design. The dimensions are 51.5 x 20.3 x 16.3 mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.2 mm² to 6 mm². It has one level. Seven potentials can connect seven poles using the seven clamping points The contacts are made of electrolytic copper (ECu), the clamping spring is made of chrome-nickel spring steel (CrNi), and the gray housing is made of polyamide (PA66) for insulation. Tin is used for coating the contact surfaces. An operating tool is used to operate this PCB terminal block. THT is used to solder the PCB terminal block. These PCB terminal blocks are mounted using feed-through mounts.. The conductor is designed to be inserted into the board at a 90° angle.. The solder pins, which are 0.8 x 1 mm in cross-section and 4 mm long, are set out over the entire terminal strip (in-line). There are two solder pins per potential.