Wago 2616-1106/020-005

PCB terminal block, 2616 Series, leverThis PCB terminal block (item number 2616-1106/020-005) is designed for quick and simple connections. It is perfect for custom installations with different mounting types. Our PCB terminal block is rated for 1000 V and is designed to handle a rated current of up to 76 A. As such, it is suitable for high-load applications. Strip lengths must be between 18 mm and 20 mm when connecting conductors to this PCB terminal block. This product incorporates one conductor terminal and utilizes Push-in CAGE CLAMP®. Push-in CAGE CLAMP® technology provides a universal connection solution for all conductor types. It allows both solid and fine-stranded conductors with ferrules to be inserted directly into the clamping point without the need for tools. The dimensions are 62.8 x 37.2 x 32 mm (width x height x depth). Depending on the type of conductor, this PCB terminal block is designed for conductor cross sections ranging from 0.75 mm² to 16 mm². Up to six potentials / six poles can be connected to this terminal strip using six clamping points on one level. The contacts are made of electrolytic copper (ECu), the red housing is made of polyamide (PA66) for insulation, and the clamping spring is made of chrome-nickel spring steel (CrNi). The contact surface is coated with tin. A lever is used to operate this PCB terminal block. THT is used to solder the PCB terminal block. The conductor is designed to be inserted at an angle of 0°.. The solder pins measure 1.2 x 1.2 mm in cross-section and 4 mm in length and are laid out over the entire terminal strip (staggered). There are three solder pins per potential.