Back to products
B&R X20DO6529
B&R X20DO6529 Price range: € 47,70 through € 170,00

Fast delivery within 72 Hours

B&R X20DO6325

6 digital outputsSource connection2-wire connectionsGND for signal supplyIntegrated output protection1-wire connection type with 6-pin terminal blockDiagnostic functions (open line, short circuit and…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

6 digital outputsSource connection2-wire connectionsGND for signal supplyIntegrated output protection1-wire connection type with 6-pin terminal blockDiagnostic functions (open line, short circuit and overload/overtemperature)OSP mode

The module is equipped with six outputs for 1 or 2-wire connections with diagnostic functions. The X20 6-pin terminal block can be used for universal 1-line wiring. Two-line wiring can be implemented using the 12-pin terminal block. The outputs on the module are designed for source connections.

Specification

I/O module6 digital outputs 24 VDC for 1- or 2-wire connections with diagnostic function
B&R ID code0xE284
Status indicatorsI/O function per channel, diagnostics per channel, operating state, module status
Module run/errorYes, using LED status indicator and software
Status outputsYes, using LED status indicator and software
Diagnostic outputsYes, using LED status indicator and software
Bus0.15 W
Internal I/O0.4 W
Additional power dissipation caused by actuators (resistive) [W]0.225
CEYes
UKCAYes
CRA (Cyber Resilience Act)In preparation
ATEXZone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X
ULcULus E115267 Industrial control equipment
HazLoccCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNVTemperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCSYes
LRENV1
KRYes
ABSYes
BVEC33B Temperature: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck
VariantCurrent-sourcing FET
Nominal voltage24 VDC
Switching voltage24 VDC -15% / +20%
Nominal output current0.5 A
Total nominal current3 A
Connection type1- or 2-wire connections
Output circuitSource
Output protectionThermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”) Internal freewheeling diode for switching inductive loads (see section “Switching inductive loads”)
Open circuitAt <1 mA (typ.), detected if output OFF, delay approx. 10 ms
Short circuit to 24 VDCDetected if output OFF, delay approx. 10 ms
Short circuit to GNDDetected if output ON, delay approx. 10 ms
Overload/OvertemperatureDetected if output ON, delay approx. 10 ms
Leakage current when the output is switched off<160 μA
RDS(on)150 mΩ
Peak short-circuit current<40 A
Switch-on in the event of overload shutdown or short-circuit shutdownDepends on the module temperature
0 → 1<100 μs
1 → 0<300 μs
Resistive loadMax. 2000 Hz
Inductive loadSee section “Switching inductive loads”.
Braking voltage when switching off inductive loads45 to 52 VDC
Insulation voltage between channel and bus510 Veff
Electrical isolationChannel isolated from bus Channel not isolated from channel and I/O power supply
HorizontalYes
VerticalYes
0 to 2000 mNo limitation
>2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP20
Horizontal mounting orientation-25 to 60°C
Vertical mounting orientation-25 to 50°C
Derating
Storage5 to 95%, non-condensing
Transport5 to 95%, non-condensing
Operation5 to 95%, non-condensing
NoteOrder 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch12.5+0.2 mm

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R X20DO6325”

Your email address will not be published. Required fields are marked *