Fast delivery within 72 Hours
B&R X20BC8084
POWERLINKI/O configuration and firmware update via the fieldbusIntegrated compact link selector function2 active hub expansion modules can be connected to the bus controllerRedundant supply possible…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
POWERLINKI/O configuration and firmware update via the fieldbusIntegrated compact link selector function2 active hub expansion modules can be connected to the bus controllerRedundant supply possible
The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler. POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.Systems with redundant cabling can be implemented easily using POWERLINK. Unlike ring redundancy, cable redundancy does not require cable looping, which can sometimes be problematic. This allows the creation of all types of tree structures. When using a device with the link selector function, data is always transferred via the highest quality network lines. The link selector function is integrated in the bus controller.
Specification
| Bus controller |
POWERLINK (V1/V2) controlled node with compact link selector |
|---|---|
| B&R ID code |
0x2674 |
| Status indicators |
Module status, bus function |
| Module status |
Yes, using LED status indicator and software |
| Bus function |
Yes, using LED status indicator and software |
| Dynamic node allocation (DNA) |
Yes |
| Bus |
2 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc |
| UL |
cULus E115267 |
| HazLoc |
cCSAus 244665 |
| DNV |
Temperature: B (0 to 55°C) |
| CCS |
Yes |
| LR |
ENV1 |
| KR |
Yes |
| ABS |
Yes |
| BV |
EC33B |
| KC |
Yes |
| Fieldbus |
200 μs |
| Type |
Type 2 |
| Variant |
2x shielded RJ45 |
| Line length |
Max. 100 m between 2 stations (segment length) |
| Transfer rate |
100 Mbit/s |
| Physical layer |
100BASE-TX |
| Half-duplex |
Yes |
| Full-duplex |
No |
| Autonegotiation |
Yes |
| Auto-MDI/MDIX |
Yes |
| Hub propagation delay |
0.96 to 1 µs |
| X2X Link |
200 μs |
| Synchronization between bus systems possible |
Yes |
| Electrical isolation |
POWERLINK isolated from bus and I/O |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
-25 to 60°C |
| Vertical mounting orientation |
-25 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Note |
Order 1x terminal block X20TB12 separately. |
| X20BB80 |
37.5+0.2 mm |
| X20BB82 |
87.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.