Fast delivery within 72 Hours
B&R X20AT2402
2 inputs for thermocouplesFor sensor types J, K, N, S, B, RAdditional direct raw value measurementIntegrated terminal temperature compensationConfigurable filter timeConfigurable resolution…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
2 inputs for thermocouplesFor sensor types J, K, N, S, B, RAdditional direct raw value measurementIntegrated terminal temperature compensationConfigurable filter timeConfigurable resolution
The module is equipped with 2 inputs for J, K, N, S, B and R thermocouple sensors. The module has an integrated terminal temperature compensation. This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
Specification
| I/O module |
2 inputs for thermocouples |
|---|---|
| B&R ID code |
0x1BA8 |
| Status indicators |
I/O function per channel, operating state, module status |
| Module run/error |
Yes, using LED status indicator and software |
| Inputs |
Yes, using LED status indicator and software |
| Bus |
0.01 W |
| Internal I/O |
0.72 W |
| Additional power dissipation caused by actuators (resistive) [W] |
– |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267Industrial control equipment |
| HazLoc |
cCSAus 244665Process control equipmentfor hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV |
Temperature: B (0 to 55°C)Humidity: B (up to 100%)Vibration: B (4 g)EMC: B (bridge and open deck) |
| CCS |
Yes |
| LR |
ENV1 |
| KR |
Yes |
| ABS |
Yes |
| BV |
EC33BTemperature: 5 – 55°CVibration: 4 gEMC: Bridge and open deck |
| KC |
Yes |
| Input |
Thermocouple |
| Digital converter resolution |
16-bit |
| Filter time |
Configurable between 1 ms and 66.7 ms |
| 1 channel |
80.4 ms with 50 Hz filter |
| 2 channels |
120.6 ms with 50 Hz filter |
| Output format |
INT |
| Type J: Fe-CuNi |
±0.0019 %/°C |
| Type K: NiCr-Ni |
±0.0024% / °C |
| Type N: NiCrSi-NiSi |
-270 to 1300°C (Rev. ≥D0) |
| Type S: PtRh10-Pt |
±0.0079 %/°C |
| Type B: PtRh30-PtRh6 |
±0.0114 %/°C |
| Type R: PtRh13-Pt |
±0.0074 %/°C |
| Terminal temperature |
-25.0 to 85.0°C or -25.00 to 85.00°C |
| Raw value |
±65.534 mV |
| Terminal temperature compensation |
Internal |
| Sensor standard |
EN 60584 |
| Sensor temperature |
1 LSB = 0.1°C or 0.01°C |
| Raw value output with respect to gain |
1 LSB = 1 µV or 2 µV |
| Type N (Rev. ≥D0) |
±0.0029 %/°C |
| Range undershoot |
0x8001 |
| Range overshoot |
0x7FFF |
| Open circuit |
0x7FFF |
| Open inputs |
0x7FFF |
| General fault |
0x8000 |
| Conversion procedure |
Sigma-delta |
| Linearization method |
Internal |
| Permissible input signal |
Max. ±5 V |
| Input filter |
First-order low-pass filter / cutoff frequency 500 Hz |
| Gain |
±0.06% |
| Max. gain drift |
±0.01%/°C |
| Nonlinearity |
±0.001% |
| DC |
>70 dB |
| 50 Hz |
>70 dB |
| Common-mode range |
±15 V |
| Crosstalk between channels |
<-70 dB |
| Between channel and bus |
500 Veff |
| With artificial convection |
±4°C after 10 min |
| With natural convection |
±2°C after 10 min |
| Electrical isolation |
Channel isolated from busChannel not isolated from channel |
| Horizontal |
Yes |
| Vertical |
Yes |
| 0 to 2000 m |
No limitation |
| >2000 m |
Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 |
IP20 |
| Horizontal mounting orientation |
0 to 55°C |
| Vertical mounting orientation |
0 to 50°C |
| Derating |
– |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Operation |
5 to 95%, non-condensing |
| Note |
Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch |
12.5+0.2 mm |
Reviews
Clear filtersThere are no reviews yet.