Wago 218-102/000-006

PCB terminal block, 218 Series, CAGE CLAMP®Connecting conductors is quick and easy with this PCB terminal block (item number 218-102/000-006). It is ideal for custom installations with different mounting types. Our PCB terminal block is rated for 160 V and is designed for use with a rated current of up to 6 A. Conductors should only be connected to this PCB terminal block if their strip length is between 5 mm and 6 mm. Featuring one conductor terminal along with CAGE CLAMP®, this connector outperforms the competition. Our reliable and maintenance-free CAGE CLAMP® connection makes it easy to connect all conductor types without having to prepare the conductor. For example, you don’t need to crimp ferrules. The item’s dimensions are 6.5 x 10.9 x 13 mm (width x height x depth). This PCB terminal block is suitable for conductor cross sections ranging from 0.08 mm² to 0.5 mm². Up to two potentials / two poles can be connected to this terminal strip using two clamping points on one level. The contacts are made of electrolytic copper (ECu), the blue housing is made of polyamide (PA66) for insulation, and the clamping spring is made of chrome-nickel spring steel (CrNi). Tin is used for coating the contact surfaces. This PCB terminal block is operated with a slider. The PCB terminal block is designed for THT soldering. The conductor is designed to be inserted into the board at a 40° angle.. The solder pins measure 0.5 x 0.75 mm in cross-section and 2.8 mm in length and are laid out over the entire terminal strip (in-line). There are two solder pins per potential.