Fast delivery within 72 Hours

B&R 0PS1101.3

Minimum space requirement in the control cabinet due to a thin designRobust and reliable thanks to dynamic boost with a strong output characteristic curve for starting heavy loadsOptical and preventiv…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Minimum space requirement in the control cabinet due to a thin designRobust and reliable thanks to dynamic boost with a strong output characteristic curve for starting heavy loadsOptical and preventive function monitoring with three-color LED and dry switching contactEasy handling due to push-in connections, label fields, wire stripping mark and tamper-resistant setupCan be connected in parallel for increased power and redundancyTemperature range: -25°C to +70°CWorldwide use thanks to AC and DC wide-range inputInternational certification package

48 VDC power supply unit, 1-phase, 10 A, input 100 to 240 VAC, wide range, thin design, top-hat rail installation

Specification

Status DisplayGreen LED (DC OK), threshold value Uout > 36 V
Input Output3 kV AC (type test) 3.1 kV DC (routine test)
Input Ground1.5 kV AC (type test) 3.1 kV DC (routine test)
Input Signal3 kV AC (type test) 3.1 kV DC (routine test)
Active Dc Ok Switch OutputSee section “Dry switching contact”.
Connection TypePush-in connection
C EYes
U K C AYes
U LcULus E534663 Industrial control equipment
Nominal Input Voltage100 to 240 VAC
Input Voltage100 to 240 VAC -15% to +10% 115 to 240 VAC ±10% (UL)
Network TypeStar network (TN, TT, IT(PE))
Frequency50 to 60 Hz
Inrush Current<17 A
Current Consumption5.34 A / 2.21 A (100 VAC / 240 VAC) 4.38 A / 2.3 A (120 VAC / 230 VAC) 5.29 A / 4.34 A (100 VDC / 240 VDC)
I2T<0.22 A2s
Power Failure BypassTyp. 22 ms (120 VAC) Typ. 26 ms (230 VAC)
Leakage Current To Pe<3.5 mA
Protective CircuitVaristor transient protection
Internal Fuse10 A
Required Line Fuse For Device And Line ProtectionSee section “Input protection”.
Nominal Voltage48 VDC
Output Power480 W / Max. 720 W (5 s)
Output Voltage40 to 56 VDC
Output Current10 A / Max. 15 A (5 s)
Setting Range For Output Voltage40 to 56 VDC
Control Deviation<0.1% (input voltage change ±10%) <3% (load change, dynamic) <1% (load change, static)
Rise Time≤1 s (UOUT (10 to 90%))
Residual RippleTyp. 20 mVSS
Can Be Connected In ParallelYes, for increased efficiency and redundancy
Can Be Connected In SeriesYes, for increased output voltage (observe SELV limit)
Overvoltage Protection≤60 VDC (on the output (OVP))
Protective FunctionsShort-circuit protection
Feedback Voltage Resistance≤60 VDC
EfficiencyTyp. 95.2% (120 VAC) Typ. 96.3% (230 VAC)
M T B F230 VAC / >1,600,000 h (25°C) 230 VAC / >1,000,000 h (40°C) 230 VAC / >430,000 (60°C)
Rated Load<27.9 W (120 VAC) <22.13 W (230 VAC)
No Load Operation<1.71 W (120 VAC) <2.26 W (230 VAC)
HorizontalYes
VerticalYes
Maximum5000 m
Flammability ClassV0
Ventilation/ CoolingNormal convection, no fan required
Degree Of Protection Per En 60529IP20
Protection ClassI
Operation18 ms, 30 g, in each direction, per IEC 60068-2-27
DeratingSee section “Derating”.
Starting Temperature-40°C
Storage-40 to 85°C
Transport-40 to 85°C
Pollution Degree2
Climate Category3K3, per EN 60721
Overvoltage CategoryIII (≤2000 m) / II (≤5000 m), per EN 61010-1 III (≤2000 m) / II (≤5000 m), per EN 61010-2-201
MaterialAluminum sheet, plastic cover PA
CoatingNo protective coating
InstallationEasy top-hat rail installation (NS 35 rails, EN 60715)
Width55 mm
Height135 mm
Depth132 mm
Weight925 g

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “B&R 0PS1101.3”

Your email address will not be published. Required fields are marked *