Fast delivery within 72 Hours
B&R 8BVP1650HC00.004-1
ACOPOSmulti power supply module, 165 A, AS, cold plate or pass-through mounting
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
ACOPOSmulti power supply module, 165 A, AS, cold plate or pass-through mounting
Specification
| B&R ID code | 0x2ABA |
|---|---|
| Dynamic node allocation (DNA) | Yes |
| Cooling and mounting type | Cold plate or pass-through mounting |
| Slots for plug-in modules | 2 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| UL | cULus E225616 Power conversion equipment |
| Network configurations | TT, TN-S, TN-C-S |
| Mains input voltage | 3x 220 to 3x 480 VAC ±10% |
| Frequency | 50 / 60 Hz ±4% |
| Total harmonic distortion current (THDi) | <0.2% |
| Total harmonic distortion voltage (THDu) | <1% |
| Installed load | Max. 124 kW |
| Inrush current at 400 VAC | Max. 102 A |
| Switch-on interval | >800 s |
| 230 VAC | 69.7 mF |
| 400 VAC | 23 mF |
| 480 VAC | 16 mF |
| Nominal switching frequency | 5 kHz |
| Possible switching frequencies | 5 / 10 kHz |
| Integrated line filter per EN 61800-3, category C3 | No |
| Integrated regeneration choke | No |
| Regenerative | Yes |
| Power factor correction (PFC) | Yes |
| Line fuse | Max. 400 A (gG fuses per IEC 60269-1 or Class CC, J, T) Max. 410 A (circuit breaker per EN 60947-2 or UL 489) |
| L1, L2, L3, PE | M8 threaded bolts |
| Shield connection | Yes |
| Flexible and fine-stranded wires | — |
| Terminal cable cross section dimension of shield connection | 32 to 50 mm |
| Nominal | 5 to 40°C |
| Continuous power (supply and regeneration) | 120 kW |
| Mains input voltage <3x 400 VAC | 600 W/V * (400 V – Mains input voltage) |
| UDC <750 VDC | P * (1 – UDC/750) |
| Cold plate mounting | 1.05 kW/K (starting at -7°C) |
| Pass-through mounting | 209 mm |
| Starting at 500 m above sea level | 12 kW per 1000 m |
| Peak power (supply and regeneration) | 240 kW |
| Switching frequency 5 kHz | In preparation |
| Switching frequency 10 kHz | In preparation |
| DC bus capacitance | 3630 µF |
| Overload protection | No |
| Short-circuit and ground fault protection | No |
| Variant | ACOPOSmulti backplane |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 4.7 µF |
| Max. power consumption | 37 W + PSLOT1 + PSLOT2 + P24 V Out + PFan8BVF… |
| Quantity | 2 |
| DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC / 315) |
| DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
| Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
| Output voltage | 24 V +5.8% / -0.1% |
| Continuous current | 4.2 A |
| Max. overcurrent limiting | 10 A |
| Short-circuit proof | Yes |
| Open-circuit monitoring | No |
| Undervoltage monitoring | No |
| Circuit | Sink |
| Input - Power supply module | Yes |
| Input - Input | Yes |
| Maximum | 55°C |
| Low | <5 V |
| High | >15 V |
| Input current at nominal voltage | Approx. 10 mA |
| Rising edge | 52 μs ±0.5 μs (digitally filtered) |
| Falling edge | 53 μs ±0.5 μs (digitally filtered) |
| Modulation compared to ground potential | Max. ±38 V |
| Discharge capacitance | 1.8 µF |
| Power dissipation relative to continuous apparent power | IE2 (10,25) 0.2% IE2 (50,25) 0.2% IE2 (10,50) 0.2% IE2 (50,50) 0.4% IE2 (90,50) 0.9% IE2 (10,100) 0.2% IE2 (50,100) 0.9% IE2 (90,100) 1.9% |
| Nominal losses in standby mode | 14.5 W |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 427.5 mm |
| Height | 317 mm |
| Cold plate | 212 mm |
| Weight | 18 kg |
| Module width | 8 |
Reviews
Clear filtersThere are no reviews yet.