Fast delivery within 72 Hours
B&R 8BVI0660HWSA.008-1
ACOPOSmulti SafeMOTION SinCos inverter module, 66 A, AS, wall mounting
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
ACOPOSmulti SafeMOTION SinCos inverter module, 66 A, AS, wall mounting
Specification
| B&R ID code | 0x2C27 |
|---|---|
| Dynamic node allocation (DNA) | Yes |
| Cooling and mounting type | Wall mounting |
| Slots for plug-in modules | 2 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| Functional safety | Yes (openSAFETY) |
| UL | cULus E225616 Power conversion equipment |
| Nominal | 5 to 40°C |
| Continuous power consumption | 48.8 kW |
| Switching frequency 5 kHz | 25 m |
| Switching frequency 10 kHz | 25 m |
| Switching frequency 20 kHz | 25 m |
| DC bus capacitance | 1980 µF |
| Variant | ACOPOSmulti backplane |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 32.9 µF |
| Max. power consumption | 25 W + PSMC1 + PSLOT2 + P24 V Out + PHoldingBrake |
| Quantity | 1 |
| DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC/315) |
| DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
| Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
| Continuous power per motor connection | 48 kW |
| Continuous current per motor connection | 66 Aeff |
| Starting at 500 m above sea level | 6.6 Aeff per 1000 m |
| Peak current | 132 Aeff |
| Nominal switching frequency | 5 kHz |
| Possible switching frequencies | 5 / 10 / 20 kHz |
| Insulation stress of the connected motor per IEC TS 60034-25:2004 | Limit value curve A |
| Overload protection | Yes |
| Short-circuit and ground fault protection | Yes |
| Max. output frequency | 598 Hz |
| U, V, W, PE | M8 threaded bolts |
| Shield connection | Yes |
| Flexible and fine-stranded wires | — |
| Terminal cable cross section dimension of shield connection | 12 to 50 mm |
| Output voltage | 5 V ±5% |
| Continuous current per connection | 4.2 A |
| Max. internal resistance | 0.15 Ω |
| Extinction potential | Approx. 30 V |
| Max. extinction energy per switching operation | 3 Ws |
| Max. switching frequency | 0.5 Hz |
| Overload and short-circuit protection | Yes |
| Open-circuit monitoring | Yes |
| Undervoltage monitoring | Yes |
| Response threshold for open-circuit monitoring | Approx. 0.5 A |
| Response threshold for undervoltage monitoring | 24 VDC -2% / -4% |
| Type | SinCos |
| Connections | 15-pin female DSUB connector |
| Status indicators | UP/DN LEDs |
| Encoder - ACOPOSmulti | No |
| Encoder monitoring | Yes |
| Max. encoder cable length | 50 m |
| Load capacity | 300 mA |
| Sense lines | 2, compensation of max. 2 x 0.7 V |
| Short-circuit proof | Yes |
| Overload-proof | Yes |
| Signal transmission | Differential signal, symmetrical |
| Data transfer rate | 781.25 kbit/s |
| In motion | 0.5 to 1.35 V |
| At standstill | 0.8 to 1.35 V |
| Differential voltage deviation per signal period | ±10% |
| Common-mode voltage | Max. -5 V to +9 V |
| Terminating resistor | 120 Ω |
| Max. input frequency | 200 kHz |
| Signal frequency (-5 dB) | <300 kHz |
| Signal frequency (-3 dB) | DC up to 200 kHz |
| ADC resolution | 12-bit |
| Differential voltage for low | ≤-0.2 V |
| Differential voltage for high | ≥0.2 V |
| Resolution @ 1 VSS | Number of encoder lines * 5700 |
| Accuracy | — |
| Noise | — |
| Max. power consumption per encoder interface | PSMC[W] = 25 V * (0.376 A + 0.35 * IEncoder[A]) |
| Circuit | Sink |
| Input - Inverter module | Yes |
| Input - Input | Yes |
| Maximum | 55°C |
| Low | <5 V |
| High | >15 V |
| Input current at nominal voltage | Approx. 10 mA |
| Rising edge | 52 µs ±0.5 µs (digitally filtered) |
| Falling edge | 53 µs ±0.5 µs (digitally filtered) |
| Modulation compared to ground potential | Max. ±38 V |
| Resistance range | 500 Ω to 5 kΩ |
| Discharge capacitance | 0.44 µF |
| Power dissipation relative to continuous apparent power | IE2 (10,25) 1% IE2 (50,25) 1% IE2 (10,50) 1.3% IE2 (50,50) 1.3% IE2 (90,50) 1.3% IE2 (10,100) 2% IE2 (50,100) 2.1% IE2 (90,100) 2.1% |
| Nominal losses in standby mode | 11.3 W |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 213.5 mm |
| Height | 317 mm |
| Wall mounting | 263 mm |
| Weight | Approx. 10.9 kg |
| Module width | 4 |
Reviews
Clear filtersThere are no reviews yet.