Fast delivery within 72 Hours
B&R 8BAC0120.001-2
EnDat 2.2 encoder interface for installation in ACOPOSmulti modulesEncoder monitoringEmbedded parameter chip when used with B&R motors
AC…
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
EnDat 2.2 encoder interface for installation in ACOPOSmulti modulesEncoder monitoringEmbedded parameter chip when used with B&R motors
ACOPOSmulti plug-in module, EnDat 2.2 interface
Specification
| Module type |
ACOPOSmulti plug-in module |
|---|---|
| B&R ID code |
0xB0BF |
| Slot |
Slots 1 and 2 |
| Max. power consumption |
PModule [mW] = 500 mW + 19 V * IEncoder [mA] |
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
In preparation |
| UL |
cULus E225616Power conversion equipment |
| KC |
Yes |
| Module-side connection |
9-pin male DSUB connector |
| Status indicators |
UP/DN LEDs |
| Encoder - ACOPOSmulti |
No |
| Encoder monitoring |
Yes |
| Max. encoder cable length |
100 mDepends on the cross section of the power supply wires in the encoder cable |
| Output voltage |
Typ. 12.5 V |
| Load capacity |
350 mA |
| Overload-proof |
Yes |
| Short-circuit proof |
Yes |
| Signal transmission |
RS485 |
| Baud rate |
6.25 Mbit/s |
| Nominal |
5 to 40°C |
| Maximum |
55°C |
| Storage |
5 to 95% |
| Transport |
Max. 95% at 40°C |
| Operation |
5 to 85% |
Reviews
Clear filtersThere are no reviews yet.