Fast delivery within 72 Hours
B&R 8B0P0110HW00.000-1
Passive power supply modules act as the central power supply for ACOPOSmulti drives and feed the DC bus. They are not subjected to a control loop and therefore cannot provide regeneration.The 8B0P0110…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Passive power supply modules act as the central power supply for ACOPOSmulti drives and feed the DC bus. They are not subjected to a control loop and therefore cannot provide regeneration.The 8B0P0110HC00.000-1 passive power supply module has an integrated line filter and internal braking resistor. It is also possible to connect an optional external braking resistor. In addition, an interface for connecting 24 VDC is also available. This allows the internal 24 VDC supply to provide an ACOPOSmulti drive system with up to 90 watts of nominal power. This eliminates the need for an 8B0C auxiliary supply module in many applications. The system can start either from external 24 VDC or mains power.
ACOPOSmulti power supply module, passive, 11 A, AS, wall mounting, 24 V In 1x, integrated line filter
Specification
| B&R ID code | 0xDDAD |
|---|---|
| Dynamic node allocation (DNA) | Yes |
| Cooling and mounting type | Wall mounting |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL | cULus E225616 Power conversion equipment |
| Network configurations | TT, TN-S, TN-C-S |
| Mains input voltage | 3x 208 to 3x 480 VAC ±10% |
| Frequency | 50 / 60 Hz ±4% |
| Installed load | Max. 6.7 kVA |
| Power dissipation with continuous power | [2.8 * P² + 0.5 * P + 10] W |
| Inrush current at 400 VAC | 2 A |
| Switch-on interval | >120 s |
| 230 VAC | 9 mF |
| 400 VAC | 3 mF |
| 480 VAC | 2 mF |
| Integrated line filter per EN 61800-3, category C3 | Yes |
| Integrated regeneration choke | No |
| Regenerative | No |
| Power factor correction (PFC) | No |
| Line fuse | Max. 33 A (gG fuses per IEC 60269-1 or Class CC, J, T) Max. 27.5 A (circuit breaker per EN 60947-2 or UL 489) |
| L1, L2, L3, PE | Connector |
| PE | M5 threaded bolt |
| Shield connection | Yes |
| With wire end sleeve | 0.25 to 6 mm² |
| UL/C-UL-US | 24 to 8 AWG |
| CSA | 24 to 8 AWG |
| Terminal cable cross section dimension of shield connection | 23 to 35 mm |
| Nominal | 5 to 40°C |
| Continuous power | 4 kW |
| Mains input voltage <3x 400 VAC | 10 W/V * (400 V – Mains input voltage) |
| Starting at 500 m above sea level | 0.4 kW per 1000 m |
| Reduction of continuous power depending on cooling method | No reduction |
| Peak power output (supply) | 12 kW |
| DC bus capacitance | 330 µF |
| Overload protection | Yes |
| Short-circuit and ground fault protection | Yes (with RB+ by externally replaceable melting fuse) |
| Variant | ACOPOSmulti backplane |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 23.5 µF |
| Max. power consumption | 12 W |
| Minimum | 18 VDC |
| Maximum | 55°C |
| 24 VDC internal system power supply | 25 VDC ±1.6% (regulated) |
| Switch-on threshold | 16 V |
| Max. continuous current | 4.0 A |
| Status indicators | 24 V LED |
| Undervoltage detection | Yes |
| Overvoltage detection | Yes |
| No-load proof | Yes |
| Overload-proof | Yes |
| Short-circuit proof | Yes |
| Overtemperature protection | Yes |
| 24 VDC In, COM | Connector |
| With wire end sleeves | 0.2 to 2.5 mm² |
| Peak power int./ext. | 2 kW / 24 kW (max. 1 s) |
| Continuous power int./ext. | 150 W / 8 kW |
| Min. braking resistance | 25 Ω |
| Rated current of built-in fuse | 15 A (fast-acting) |
| RB+, RB-, PE | Connector |
| Discharge capacitance | 0.4 µF |
| Power dissipation relative to continuous apparent power | IE2 (10;25) 0.6% IE2 (50;25) 0.7% IE2 (10;50) 0.6% IE2 (50;50) 0.7% IE2 (90;50) 0.9% IE2 (10;100) 0.7% IE2 (50;100) 0.9% IE2 (90;100) 1.5% |
| Nominal losses in standby mode | 6 W |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 53.5 mm |
| Height | 317 mm |
| Wall mounting | 263 mm |
| Weight | 3.5 kg |
| Module width | 1 |
Reviews
Clear filtersThere are no reviews yet.