Fast delivery within 72 Hours
B&R 8B0C0320HC00.B00-1
ACOPOSmulti auxiliary supply module, 35 A, AS, cold plate or pass-through mounting, 42…58 VOut
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
ACOPOSmulti auxiliary supply module, 35 A, AS, cold plate or pass-through mounting, 42…58 VOut
Specification
| Cooling and mounting type | Cold plate |
|---|---|
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL | cULus E225616 Power conversion equipment |
| Nominal | 5 to 40°C |
| Operating range in continuous operation | 260 to 800 VDC |
| Full continuous power | 550 to 800 VDC |
| Continuous power consumption | Max. 2120 W |
| Power dissipation with continuous power | 15 W (0% continuous power) 30 W (50% continuous power) 90 W (100% continuous power) |
| DC bus capacitance | 1.2 µF |
| Variant | Connector |
| Quantity | 1 |
| DC bus voltage (UDC): 260 to 315 VDC | 25 VDC * (UDC/315) |
| DC bus voltage (UDC): 315 to 800 VDC | 24 VDC ±6% |
| Fuse protection | 250 mA (slow-blow) electronic, automatic reset |
| 24 VDC, COM | Connector |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 47 µF |
| Max. power consumption | 7 W + P 24 VDC Out |
| Workspace | 42 to 58 VDC |
| Residual ripple | Typ. 200 mVSS |
| Input stability | Typ. <50 mV (dynamic) |
| Load stability | 250 mVSS (dynamic) |
| Continuous power | (Output voltage / 58 VDC) * 2030 W |
| Continuous current | ±35 A |
| Peak current | ±60 A (max. 2 s) |
| Depending on ambient temperature | 0.2 A/K (starting at 40°C) |
| Depending on installation elevation | 3.5 A per 1000 m (starting at 500 m above sea level) |
| Depending on the input voltage | 0,136 A/V * (600 V – Input voltage) |
| Depending on cooling type | No reduction |
| Startup delay | Max. 8 s |
| Startup time | Typ. 300 ms |
| No-load proof | Yes |
| Overload-proof | Yes |
| Short-circuit proof | Yes |
| Feedback protection | Yes <63 V |
| Overtemperature protection | Yes |
| Output/Input isolation | PELV |
| Shield connection | Yes |
| Connection | Parallel connection on output: Not permitted Serial connection on output: Not permitted |
| Max. cable length | 30 m |
| Type | POWERLINK V2 controlled node (CN) |
| Line length | Max. 100 m between 2 stations (segment length) |
| Transfer rate | 100 Mbit/s |
| Modulation compared to ground potential | ±38 VDC |
| Circuit | Sink |
| Input current at nominal voltage | Typ. 10 mA |
| Switching threshold | LOW: 15 VDC |
| Maximum | 55°C |
| Electrical isolation | Yes |
| Rising edge | 52 ±0.5 µs (digitally filtered) |
| Falling edge | 53 ±0.5 µs (digitally filtered) |
| Shielding | No |
| Voltage | Max. 30 VDC |
| Current | Max. 100 mA |
| Loop through for STO | Yes |
| Load pulse | 3 mA |
| Pulse duration | Max. 500 ms |
| Threshold value for undervoltage warning | 5.2 V |
| Idle current | Max. 10 µA |
| Mapp Motion | 5.13.1 and higher |
| ACP10/ARNC0 | All versions |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 53.5 mm |
| Height | 317 mm |
| Cold plate | 212 mm |
| Weight | 2.6 kg |
| Module width | 1 |
Reviews
Clear filtersThere are no reviews yet.