Fast delivery within 72 Hours
B&R 80MPF3.250S000-01
2-phase hybrid stepper motor, 60 mm flange, length 62 mm, 2.5 A serial / 5 A parallel, 1.7 Nm holding torque, 1.2 Nm stall torque
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
2-phase hybrid stepper motor, 60 mm flange, length 62 mm, 2.5 A serial / 5 A parallel, 1.7 Nm holding torque, 1.2 Nm stall torque
Specification
| Stepper motor |
Stepper motor flange size 60 mm, length 62 mm |
|---|---|
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
Not applicable |
| Serial |
true |
| Parallel |
true |
| Series wiring |
5.6 mH |
| Parallel wiring |
1.4 mH |
| Stall torque |
1.2 Nm |
| Holding torque |
1.7 Nm |
| Detent torque |
<45 mNm |
| Rotor inertia |
440 gcm2 |
| Protection class |
IP30 |
| Stepping angle |
1.8° |
| Max. surface temperature |
100°C |
| Average period of operation between failures |
21,000 hours |
| Cable length |
300 mm |
| Cable cross section |
22 AWG |
| Shaft type |
Flat-sided shaft (D-cut) |
| Insulation class |
B (130°C) |
| Insulation resistance |
100 MΩ min. 500 VDC |
| Dielectric resistance |
500 VAC for 1 minute |
| Driver supply voltage |
Max. 80 VDC |
| Operation |
5 to 95%, non-condensing |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Max. radial load |
75 N |
| Max. axial load |
The permissible axial load is not permitted to be greater than the motor mass. |
| Weight |
880 g |
| Length |
62 mm |
Reviews
Clear filtersThere are no reviews yet.