Fast delivery within 72 Hours
Festo VTOI-A-V8-30D3-U14-08-V-S015-1
One valve controller for distributing to 8 dispensing channels , Grid dimension 9 mm – ideal for microwell plates , Simple design with side-by-side mounting for increased throughput , Only a few compo…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
One valve controller for distributing to 8 dispensing channels , Grid dimension 9 mm – ideal for microwell plates , Simple design with side-by-side mounting for increased throughput , Only a few components are needed to form a complete system , Suitable for aggressive liquids
Specification
| Valve Function |
2/2-way, closed, monostable |
|---|---|
| Operating Pressure |
-2.9, 9.425 psi |
| Internal Volume |
10 µl fluid space valve, 178 µl distributor block with valve, needle and fittings |
| Nominal Size |
0.8 mm |
| Nominal Width Of Dosing Needle |
0.3 mm |
| Length Of Dosing Needle |
30 mm |
| Grid Dimension |
9 mm |
| Sealing Principle |
Soft |
| Mounting Position |
Vertical |
| Type Of Reset |
Mechanical spring |
| Type Of Piloting |
Direct |
| Suitability For Vacuum |
yes |
| Min. Dosing Volume |
1 µl |
| Note On Dosing Volume |
Depends on configuration, environment and application |
| Typical Dosing Precision |
≤ 5% Tip-to-Tip CV, ≤ 3% Intra-Run CV |
| Note On Dosing Precision |
Depends on configuration, environment and application |
| Duty Cycle |
100% |
| Electrical Power Consumption |
2 W |
| Nominal Operating Voltage Dc |
24 V |
| Permissible Voltage Fluctuations |
+/- 10 % |
| Medium |
Liquid media, Gaseous media |
| Note On The Medium |
Maximum particle size 20 µm |
| Instructions On Use |
See application note (available on the Support Portal at festo.com) |
| Vibration Resistance |
Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock Resistance |
Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion Resistance Class Crc |
0 – No corrosion stress |
| Labs (Pwis) Conformity |
VDMA24364-B2-L |
| Storage Temperature |
5, 40 °C |
| Media Temperature |
5, 50 °C |
| Degree Of Protection |
IP30 |
| Note On Degree Of Protection |
In assembled state |
| Ambient Temperature |
5, 40 °C |
| Product Weight |
55 g |
| Electrical Connection |
2-wire, 2x single wires, Open end |
| Cable Length |
0.15 m |
| Wire Ends |
Sheath removed |
| Conductor Nominal Cross Section |
AWG28 |
| Type Of Mounting |
Via through-hole for M3 screw |
| Fluid Connection |
Female thread 1/4-28 UNF-2B |
| Note On Fluid Connection |
Fitting enclosed for tubing with 3 mm outside diameter |
| Material Of Dosing Needle |
High-alloy stainless steel |
| Material Number Of Dosing Needle |
1.4404 |
| Note On Materials |
RoHS-compliant |
| Material In Contact With The Medium |
PPS, High-alloy stainless steel |
| Type Of Actuation |
Electric |
| Nominal Altitude Of Use |
<= 2000 m NHN |
| Relative Air Humidity |
0 – 95%, Non-condensing |
Reviews
Clear filtersThere are no reviews yet.