Fast delivery within 72 Hours
B&R 80MPD5.600S014-01
2-phase hybrid stepper motor, 56.4 mm flange, length 101.5 mm, ABR 24 VDC, 6 A parallel, 3.0 Nm holding torque, 2.2 Nm stall torque
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
2-3 Days
From $20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From $40
-
Warranty 1 year
-
Free 30-Day returns
Description
2-phase hybrid stepper motor, 56.4 mm flange, length 101.5 mm, ABR 24 VDC, 6 A parallel, 3.0 Nm holding torque, 2.2 Nm stall torque
Specification
| Stepper motor |
Stepper motor flange size 56.4 mm, length 101.5 mm, incremental encoder |
|---|---|
| CE |
Yes |
| UKCA |
Yes |
| CRA (Cyber Resilience Act) |
Not applicable |
| Wiring |
Parallel |
| Current |
6 A |
| Resistance/Phase |
0.6 Ω |
| Inductance/Phase |
2.2 mH |
| Stall torque |
2.2 Nm |
| Holding torque |
3.0 Nm |
| Detent torque |
<90 mNm |
| Rotor inertia |
Approx. 470 gcm2 |
| Stepping angle |
1.8° |
| Max. surface temperature |
95°C |
| Average period of operation between failures |
21,000 hours |
| Shaft type |
Flat-sided shaft (D-cut) |
| Insulation class |
B (130°C) |
| Insulation resistance |
100 MΩ min. 500 VDC |
| Dielectric resistance |
500 VAC for 1 minute |
| Driver supply voltage |
Max. 80 VDC |
| Degree of protection per EN 60529 |
IP20 |
| Operation |
5 to 95%, non-condensing |
| Storage |
5 to 95%, non-condensing |
| Transport |
5 to 95%, non-condensing |
| Number of outputs |
3 |
| Resolution |
1024 increments / 256 positions per rotation |
| Output circuit |
Push/Pull level, asymmetrical |
| Output protection |
Protection against short circuit |
| Current consumption |
Max. 12 mA + Output load |
| Supply voltage |
18 to 30 VDC |
| Max. output current |
±10 mA per output |
| Max. radial load |
73.5 N |
| Max. axial load |
The permissible axial load is not permitted to be greater than the motor mass. |
| Weight |
1,140 g |
| Length |
101.5 mm |
Reviews
Clear filtersThere are no reviews yet.