Fast delivery within 72 Hours
Festo DSBG-…-320- –
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensi…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs
Specification
| Stroke |
1, 2250 mm |
|---|---|
| Piston diameter |
320 mm |
| Piston rod thread |
M48x2, M48, M42x2, M36x2, M36, M30x2, M27x2, M27 |
| Based on standard |
ISO 15552 |
| Cushioning |
Elastic cushioning rings/plates at both ends, Pneumatic cushioning, adjustable at both ends |
| Mounting position |
optional |
| Conforms to standard |
ISO 15552 |
| Piston-rod end |
Male thread, Female thread |
| Design |
Piston, Piston rod, Tie rod, Cylinder barrel |
| Position detection |
Via proximity switch |
| Symbol |
00991217, 00991218, 00991235, 00991237 |
| Variants |
Extended male piston rod thread, Piston rod with female thread, Custom thread on the piston rod, Extended piston rod, High corrosion protection, Through piston rod, Heat-resistant seals max. 120°C, Screwed-on swivel mounting position, Spacer bolt on end cap side, Spacer bolt on both sides, Spacer bolt on bearing cap side, Variable spacer bolt length, Shortened male piston rod thread, Piston rod at one end, For proximity switch |
| Operating pressure |
0.6, 10 bar |
| Mode of operation |
Double-acting |
| CE mark (see declaration of conformity) |
To EU Explosion Protection Directive (ATEX) |
| Explosion protection |
Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX) |
| ATEX category gas |
II 2G |
| ATEX category dust |
II 2D |
| Explosion ignition protection type for gas |
c T4 |
| Explosion ignition protection type for dust |
c T120°C |
| Explosion ambient temperature |
-20°C <= Ta <= +60°C |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC |
2 – Moderate corrosion stress, 3 – high corrosion stress |
| LABS (PWIS) conformity |
VDMA24364-B1/B2-L |
| Ambient temperature |
-20, 120 °C |
| Impact energy in end positions |
6, 12.6 J |
| Cushioning length |
65 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke |
46385 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke |
46385, 48255 N |
| Note on materials |
RoHS-compliant |
| Material cover |
Cast aluminium, coated |
| Material piston seal |
FPM, NBR |
| Material piston |
Cast aluminium |
| Material piston rod |
High-alloy steel, High-alloy stainless steel |
| Material piston rod wiper |
FPM, NBR |
| Buffer seal material |
FPM, TPE-U(PU) |
| Material of cushioning boss |
Wrought aluminium alloy, POM |
| Material cylinder barrel |
Smooth-anodised wrought aluminium alloy |
| Material nut |
Galvanised steel, High-alloy stainless steel |
| Material bearing |
Bronze, Metal polymer compound |
| Material collar nut |
Galvanised steel, High-alloy stainless steel |
| Material tie rod |
High-alloy steel, High-alloy stainless steel |
| Material spacer bolt |
High-alloy steel, High-alloy stainless steel |
| Material swivel mounting |
Galvanised steel |
Reviews
Clear filtersThere are no reviews yet.