Fast delivery within 72 Hours
Festo DSBG-…-160- –
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensi…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs
Specification
| Stroke | 1, 2700 mm |
|---|---|
| Piston diameter | 160 mm |
| Piston rod thread | M36x2, M36, M30x2, M27x2, M27, M24, M20x1.5, M20, M16x1.5, M16 |
| Based on standard | ISO 15552 |
| Cushioning | Elastic cushioning rings/plates at both ends, Pneumatic cushioning, adjustable at both ends |
| Mounting position | optional |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread, Female thread |
| Design | Piston, Piston rod, Tie rod, Cylinder barrel |
| Position detection | Via proximity switch |
| Symbol | 00991217, 00991218, 00991235, 00991237 |
| Variants | Extended male piston rod thread, Piston rod with female thread, Custom thread on the piston rod, Extended piston rod, Metal scraper, High corrosion protection, Through piston rod, Heat-resistant seals max. 120°C, Clamped swivel mounting position, Screwed-on swivel mounting position, Spacer bolt on end cap side, Spacer bolt on both sides, Spacer bolt on bearing cap side, Variable spacer bolt length, Temperature range 0 to 150°C, Shortened male piston rod thread, Piston rod at one end, For proximity switch |
| Operating pressure | 0.6, 10 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| Explosion protection | Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | c T4 |
| Explosion ignition protection type for dust | c T120°C |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress, 3 – high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L, VDMA24364 zone III |
| Ambient temperature | -20, 150 °C |
| Impact energy in end positions | 2.3, 3.3 J |
| Cushioning length | 48 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 11310 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 11310, 12064 N |
| Pneumatic connection | G3/4 |
| Note on materials | RoHS-compliant |
| Material cover | Cast aluminium, coated |
| Material piston seal | FPM, NBR |
| Material piston | Cast aluminium |
| Material piston rod | High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel |
| Material piston rod wiper | FPM, NBR |
| Buffer seal material | FPM, TPE-U(PU) |
| Material of cushioning boss | Wrought aluminium alloy, POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel, High-alloy stainless steel |
| Material rod wiper | Brass |
| Material bearing | Bronze, Metal polymer compound |
| Material collar nut | Galvanised steel |
| Material tie rod | High-alloy steel, High-alloy stainless steel |
| Material spacer bolt | High-alloy steel, High-alloy stainless steel |
| Material swivel mounting | Painted spheroidal graphite cast iron |
Reviews
Clear filtersThere are no reviews yet.