Fast delivery within 72 Hours
IFM AL2507
AL2507
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Separate power supply up to 16 A total current
Current rating per port up to 2 A
Use in safety circuits
Connection of analogue signals 4…20 mA, 0…10 V
Extension of IO-Link masters with digital inputs and outputs, as well as analogue inputs
Specification
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
|---|---|
| Current consumption[mA] [mA] | 50; (US) |
| Protection class | III |
| Additional voltage supply[V] [V] | 18...30 DC; (UA) |
| Max. current consumption from additional supply[mA] [mA] | 16000; (UA) |
Inputs / outputs
| Total number of inputs and outputs | 16 |
|---|---|
| Number of inputs and outputs | Number of digital inputs: 16; Number of analogue inputs: 8; Number of frequency inputs: 2; Number of digital outputs: 16 |
Inputs
| Number of frequency inputs | 2 |
|---|---|
| Number of digital inputs | 16; (parameterisable) |
| Input circuit of digital inputs | PNP; (type 3 (IEC 61131-2)) |
| Sensor supply of the inputs | AUX (UA) |
| Power supply[V] [V] | 18...30 |
| Input current High[mA] [mA] | 2...15 |
| Input current Low[mA] [mA] | 0...1.5 |
| Switching level high[V] [V] | 11...28 |
| Switching level low[V] [V] | 0...5 |
| Number of analogue inputs | 8; (parameterisable current/voltage input) |
| Analogue input (current)[mA] [mA] | 4...20 |
| Analogue input (voltage)[V] [V] | 0...10 |
| Resolution of analogue input | 16 Bit |
| Precision analogue input[%] [%] | 0,3 |
Outputs
| Number of digital outputs | 16; (parameterisable) |
|---|---|
| Max. current load per output[mA] [mA] | 2000 |
| Max. current load outputs total[A] [A] | 16 |
| Short-circuit protection | yes |
| Actuator supply outputs | AUX (UA) |
| Number of PWM outputs | 8; (acyclic enhanced modus) |
| Number of PWM-I outputs | 2; (acyclic enhanced modus) |
| PMW/PWM-I output | max. current PWM-I output [mA] 2000 available factors for the controller [PID] Kp, Ki, Kd currently requested resolution [mA] 1 accuracy PWM-I Ausgang [%] 2,2 range of the PWM output pulse/pause ratio [‰] 0...1000 switch-on time resolution ‰] 1 PWM/PWM-I frequency range [Hz] 20...1000 number of configurable frequencies 2 number of PWM outputs with optional dither 8 dither level [‰] 1...250 dither number 1...20 |
| max. current PWM-I output [mA] | 2000 |
| available factors for the controller [PID] | Kp, Ki, Kd |
| currently requested resolution [mA] | 1 |
| accuracy PWM-I Ausgang [%] | 2,2 |
| range of the PWM output pulse/pause ratio [‰] | 0...1000 |
| switch-on time resolution ‰] | 1 |
| PWM/PWM-I frequency range [Hz] | 20...1000 |
| number of configurable frequencies | 2 |
| number of PWM outputs with optional dither | 8 |
| dither level [‰] | 1...250 |
| dither number | 1...20 |
Measuring/setting range
| Sampling rate[Hz] [Hz] | 0...3000 |
|---|
Interfaces
| Communication interface | IO-Link |
|---|---|
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 4 |
| Supported DeviceIDs | Acyclic enhanced parametrisation 1449 Acyclic parametrisation 1316 Cyclic parametrisation 1315 |
| Acyclic enhanced parametrisation | 1449 |
| Acyclic parametrisation | 1316 |
| Cyclic parametrisation | 1315 |
| Note | Parameter setting can be changed from “cyclic” to “acyclic” and “acyclic enhanced” For further information please see the IODD PDF file under "Downloads" |
| Profiles | Common - I&D Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| Function | Multiple switching signal |
Operating conditions
| Ambient temperature[°C] [°C] | -25...60 |
|---|---|
| Storage temperature[°C] [°C] | -25...70 |
| Max. relative air humidity[%] [%] | 90 |
| Max. height above sea level[m] [m] | 2000 |
| Protection | IP 65; IP 67; IP 69K; (operation with stainless steel protective caps: IP 69K) |
| Protection rating (NEMA 250) | 6P |
| Pollution degree | 2 |
| Chemical media | ISO 16750-5 HLP, CC, DB, DC, DD, CA NEMA 250 5.13.1 AA |
| ISO 16750-5 | HLP, CC, DB, DC, DD, CA |
| NEMA 250 5.13.1 | AA |
Tests / approvals
| EMC | EN 61000-6-2 EN 61000-6-3 IEC 61131-9 |
|---|---|
| Shock resistance | DIN EN 60068-2-27 |
| Vibration resistance | DIN EN 60068-2-64 DIN EN 60068-2-6 |
Mechanical data
| Weight[g] [g] | 410.9 |
|---|---|
| Dimensions[mm] [mm] | 26 x 59.3 x 208 |
| Materials | housing: PA grey; socket: stainless steel (316L/1.4404) |
| Sealing material | EPDM |
| Tightening torque[Nm] [Nm] | < 0.8 |
Displays / operating elements
| Display | operation 4x LED, green fault 3 x LED, red function 16x LED, yellow |
|---|---|
| operation | 4x LED, green |
| fault | 3 x LED, red |
| function | 16x LED, yellow |
Accessories
| Accessories (optional) | protective cap for M12 sockets |
|---|
Remarks
| Remarks | Using the device within a system with requirements for functional safety is possible by deactivating the actuator voltage UA without interaction. For further information on functional safety, please refer to the operating instructions supplement under “Downloads”. |
|---|---|
| Pack quantity | 1 pcs. |
Electrical connection - AUX
| Connector | 1 x M12; coding: L |
|---|
Electrical connection - IO-Link
| Connector | 1 x M12; coding: A |
|---|
Electrical connection - inputs / outputs
| Connector | 8 x M12; coding: A; Sealing: EPDM |
|---|
Reviews
Clear filtersThere are no reviews yet.