Fast delivery within 72 Hours
Pepperl Fuchs UCC4000-50GK-B26-0,15M-Y
Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical…
Request for Quote
Shipping & Delivery
-
Courier delivery
Our courier will deliver to the specified address
5-6 Days
From €20
-
DHL Courier delivery
DHL courier will deliver to the specified address
2-3 Days
From €40
-
Warranty 1 year
-
Free 30-Day returns
Description
Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical LIN interface, Connection type: fixed cable with plug, Housing: PBT. Sensing range: 250 … 4000 mm. Dead band: 0 … 250 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 75 kHz. Operating voltage: 8 … 18 V DC , ripple 10 %SS. No-load supply current: ≤ 20 mA at 12 V DC. Power consumption: ≤ 250 mW in the measurement operating mode. Time delay before availability: ≤ 95 ms. Interface type: Physical LIN interface. Transfer rate: 19.2 kBit/s (8N1). Cycle time: 80 ms. Resolution: 2.5 mm. Repeat accuracy: ≤ 0.1 % of full-scale value. Temperature influence: 3 % of full-scale value over the entire temperature range. Electromagnetic compatibility: . Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.: . Directive 2014/30/EU: EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: fixed cable with plug. Degree of protection: IP66 / IP67 ( connector excluded ). Material: . HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated: . Housing: PBT. Transducer: epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated. Connector: . TypeJST connector: PHR-3Number of pins3: . Type: JST connector: PHR-3. Number of pins: 3. Cable: . Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm: . Cable diameter: 3 x 0.25 mm2. Material: PVC. Length: 150 mm. Mass: 100 g. Dimensions: . Height37 mmWidth50 mmLength50 mm: . Height: 37 mm. Width: 50 mm. Length: 50 mm. Output: Temperature compensation Address setting 7. Scope of delivery: 1 Nut plastic
Specification
General specifications
| Sensing range | 250 ... 4000 mm |
|---|---|
| Dead band | 0 ... 250 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 75 kHz |
Electrical specifications
| Operating voltage | 8 ... 18 V DC , ripple 10 %SS |
|---|---|
| No-load supply current | ≤ 20 mA at 12 V DC |
| Power consumption | ≤ 250 mW in the measurement operating mode |
| Time delay before availability | ≤ 95 ms |
Interface
| Interface type | Physical LIN interface |
|---|---|
| Transfer rate | 19.2 kBit/s (8N1) |
| Cycle time | 80 ms |
Output
| Resolution | 2.5 mm |
|---|---|
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Temperature influence | 3 % of full-scale value over the entire temperature range |
Directive conformity
| Electromagnetic compatibility | |
|---|---|
| Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. | |
| Directive 2014/30/EU | EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
|---|---|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | fixed cable with plug |
|---|---|
| Degree of protection | IP66 / IP67 ( connector excluded ) |
| Material | |
| HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated | |
| Housing | PBT |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated |
| Connector | |
| TypeJST connector: PHR-3Number of pins3 | |
| Type | JST connector: PHR-3 |
| Number of pins | 3 |
| Cable | |
| Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm | |
| Cable diameter | 3 x 0.25 mm2 |
| Material | PVC |
| Length | 150 mm |
| Mass | 100 g |
| Dimensions | |
| Height37 mmWidth50 mmLength50 mm | |
| Height | 37 mm |
| Width | 50 mm |
| Length | 50 mm |
Factory settings
| Output | Temperature compensation Address setting 7 |
|---|
General information
| Scope of delivery | 1 Nut plastic |
|---|

Reviews
Clear filtersThere are no reviews yet.