Fast delivery within 72 Hours

Pepperl Fuchs UCC2500-50GK-B26-0,15M-Y

Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

Ultrasonic sensor. Single head system, Thread M50, PTFE coated transducer, Physical LIN interface, Series: -50GK, Operating voltage: 8 … 18 V DC , ripple 10 %SS, Interface type: Physical LIN interface, Connection type: fixed cable with plug, Housing: PBT. Sensing range: 150 … 2500 mm. Dead band: 0 … 150 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 120 kHz. Operating voltage: 8 … 18 V DC , ripple 10 %SS. No-load supply current: ≤ 20 mA at 12 V DC. Power consumption: ≤ 250 mW in the measurement operating mode. Time delay before availability: ≤ 70 ms. Interface type: Physical LIN interface. Transfer rate: 19.2 kBit/s (8N1). Cycle time: 55 ms. Resolution: 2 mm. Repeat accuracy: ≤ 0.1 % of full-scale value. Temperature influence: 3 % of full-scale value over the entire temperature range. Electromagnetic compatibility: . Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.: . Directive 2014/30/EU: EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.. Ambient temperature: -25 … 70 °C (-13 … 158 °F). Storage temperature: -40 … 85 °C (-40 … 185 °F). Connection type: fixed cable with plug. Degree of protection: IP66 / IP67 ( connector excluded ). Material: . HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated: . Housing: PBT. Transducer: epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated. Connector: . TypeJST connector: PHR-3Number of pins3: . Type: JST connector: PHR-3. Number of pins: 3. Cable: . Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm: . Cable diameter: 3 x 0.25 mm2. Material: PVC. Length: 150 mm. Mass: 100 g. Dimensions: . Height37 mmWidth50 mmLength50 mm: . Height: 37 mm. Width: 50 mm. Length: 50 mm. Output: Temperature compensation Address setting 7. Scope of delivery: 1 Nut plastic

Specification

General specifications

Sensing range150 ... 2500 mm
Dead band0 ... 150 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 120 kHz

Electrical specifications

Operating voltage8 ... 18 V DC , ripple 10 %SS
No-load supply current≤ 20 mA at 12 V DC
Power consumption≤ 250 mW in the measurement operating mode
Time delay before availability≤ 70 ms

Interface

Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time55 ms

Output

Resolution2 mm
Repeat accuracy≤ 0.1 % of full-scale value
Temperature influence3 % of full-scale value over the entire temperature range

Directive conformity

Electromagnetic compatibility
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.

Ambient conditions

Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection typefixed cable with plug
Degree of protectionIP66 / IP67 ( connector excluded )
Material
HousingPBTTransducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
HousingPBT
Transducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
Connector
TypeJST connector: PHR-3Number of pins3
TypeJST connector: PHR-3
Number of pins3
Cable
Cable diameter3 x 0.25 mm2MaterialPVCLengthL150 mm
Cable diameter3 x 0.25 mm2
MaterialPVC
Length150 mm
Mass100 g
Dimensions
Height37 mmWidth50 mmLength50 mm
Height37 mm
Width50 mm
Length50 mm

Factory settings

OutputTemperature compensation Address setting 7

General information

Scope of delivery1 Nut plastic

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Pepperl Fuchs UCC2500-50GK-B26-0,15M-Y”

Your email address will not be published. Required fields are marked *