Pepperl Fuchs OBR2000-R2-E0-0,2M-V31-P-L

Retroreflective sensor. Laser retroreflective sensor, ultra-small design with M2 mounting, polarization filter, 2000 mm detection range, dark on, NPN output, 200 mm fixed cable with plug M8, 4-pin, Ultra-small housing design, DuraBeam Laser Sensors – durable and employable like an LED, 45° cable outlet for maximum mounting freedom under extremely tight space constraints. Effective detection range: 0 … 2 m. Reflector distance: 40 … 2000 mm. Threshold detection range: 2.3 m. Reference target: H40 reflector. Light source: laser diode. Light type: modulated visible red light , 680 nm. Polarization filter: yes. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mradPulse lengthapprox. 3 µsRepetition rateapprox. 16.6 kHzmax. pulse energy8 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad. Pulse length: approx. 3 µs. Repetition rate: approx. 16.6 kHz. max. pulse energy: 8 nJ. Diameter of the light spot: approx. 35 mm at a distance of 2000 mm. Opening angle: approx. 0.5 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 : 30000 Lux. MTTFd: 800 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted. Operating voltage: 12 … 24 V. No-load supply current: < 10 mA. Protection class: III. Switching type: NO contact / dark-on. Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 50 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Switching frequency: approx. 2 kHz. Response time: 250 µs. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2007. UL approval: E87056 , cULus Recognized, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Ambient temperature: -20 … 60 °C (-4 … 140 °F). Storage temperature: -30 … 70 °C (-22 … 158 °F). Degree of protection: IP67. Connection: 200 mm fixed cable with 4-pin, M8x1 connector. Material: . HousingPC/ABS and TPUOptical facePMMACablePUR: . Housing: PC/ABS and TPU. Optical face: PMMA. Cable: PUR. Installation: Fixing screws , 2 x M2 allen head screws included with delivery. Mass: approx. 10 g. Dimensions: . Height24 mmWidth7.5 mmDepth11.2 mm: . Height: 24 mm. Width: 7.5 mm. Depth: 11.2 mm. Cable length: 200 mm