Pepperl Fuchs OBR15M-R200-2EP-IO-V1

Retroreflective sensor with polarization filter. Retroreflective sensor with polarization filter, Medium design with versatile mounting options, Extended temperature range-40 °C … 60 °C, High degree of protection IP69K, IO-Link interface for service and process data. Effective detection range: 0 … 15 m. Reflector distance: 0.02 … 15 m. Threshold detection range: 18.5 m. Reference target: H85-2 reflector. Light source: LED. Light type: modulated visible red light. LED risk group labelling: exempt group. Polarization filter: yes. Diameter of the light spot: approx. 520 mm at a distance of 15 m. Opening angle: 2 °. Ambient light limit: EN 60947-5-2 : 60000 Lux. MTTFd: 724 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green:constantly on – power onflashing (4Hz) – short circuitflashing with short break (1 Hz) – IO-Link mode. Function indicator: Yellow LED:Permanently lit – light path clearPermanently off – object detectedFlashing (4 Hz) – insufficient operating reserve. Control elements: Light-on/dark-on changeover switch. Control elements: sensitivity adjustment. Operating voltage: 10 … 30 V DC. Ripple: max. 10 %. No-load supply current: < 18 mA at 24 V Operating voltage. Protection class: III. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Identification and diagnosisSmart Sensor type 2.4. Device ID: 0x111201 (1118721). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. Process data width: Process data input 2 BitProcess data output 2 Bit. SIO mode support: yes. Compatible master port type: A. Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on. Signal output: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected. Switching voltage: max. 30 V DC. Switching current: max. 100 mA , resistive load. Usage category: DC-12 and DC-13. Voltage drop: ≤ 1.5 V DC. Switching frequency: 1000 Hz. Response time: 0.5 ms. Communication interface: IEC 61131-9. Product standard: EN 60947-5-2. UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -40 … 60 °C (-40 … 140 °F). Storage temperature: -40 … 70 °C (-40 … 158 °F). Degree of protection: IP67 / IP69 / IP69K. Connection: 4-pin, M12 x 1 connector, 90° rotatable. Material: . HousingPC (Polycarbonate)Optical facePMMA: . Housing: PC (Polycarbonate). Optical face: PMMA. Mass: approx. 37 g. Dimensions: . Height50.6 mmWidth15 mmDepth41.7 mm: . Height: 50.6 mm. Width: 15 mm. Depth: 41.7 mm