Fast delivery within 72 Hours

Pepperl Fuchs FI-PFH-NS0137-R

HART Termination Board. Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw…

Request for Quote

Shipping & Delivery

  • Courier delivery

Our courier will deliver to the specified address

5-6 Days

From €20

  • DHL Courier delivery

DHL courier will deliver to the specified address

2-3 Days

From €40

  • Warranty 1 year
  • Free 30-Day returns

Description

HART Termination Board. Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminals. Load resistor: 220 Ω , switchable on. Type: multiplexer connection : IDC plug, 26-pin. Rated current: max. 30 mA per channel. Control elements: DIP switch. DIP switch: selection of operating mode:- ON: without load resistor- OFF: with load resistor. Factory setting: DIP switches S1 and S2: ON. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2017For further information see system description.. Degree of protection: IEC 60529:2001. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: 0 … 50 °C (32 … 122 °F). Storage temperature: -15 … 50 °C (5 … 122 °F). Relative humidity: ≤ 93 % non-condensing. Shock resistance: 15 g , 11 ms. Vibration resistance: 1 g , 10 … 150 Hz. Degree of protection: IP20. Connection: . Field sidescrew terminals , greenControl sidescrew terminals , green HART : 1 x IDC plug, 26-pin: . Field side: screw terminals , green. Control side: screw terminals , green HART : 1 x IDC plug, 26-pin. Core cross section: 0.25 … 1.5 mm2 (24 … 16 AWG). Material: . HousingPVC: . Housing: PVC. Mass: approx. 210 g. Dimensions: 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D). Height125 mmWidth110 mmDepth61 mm: . Height: 125 mm. Width: 110 mm. Depth: 61 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: PF 11 CERT 1930 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Specification

HART signal channels (non-intrinsically safe)

Load resistor220 Ω , switchable on

Interface

Typemultiplexer connection : IDC plug, 26-pin

Signal lines

Rated currentmax. 30 mA per channel

Indicators/settings

Control elementsDIP switch
DIP switchselection of operating mode:- ON: without load resistor- OFF: with load resistor
Factory settingDIP switches S1 and S2: ON

Directive conformity

Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)

Conformity

Electromagnetic compatibilityNE 21:2017For further information see system description.
Degree of protectionIEC 60529:2001
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6

Ambient conditions

Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-15 ... 50 °C (5 ... 122 °F)
Relative humidity≤ 93 % non-condensing
Shock resistance15 g , 11 ms
Vibration resistance1 g , 10 ... 150 Hz

Mechanical specifications

Degree of protectionIP20
Connection
Field sidescrew terminals , greenControl sidescrew terminals , green HART : 1 x IDC plug, 26-pin
Field sidescrew terminals , green
Control sidescrew terminals , green HART : 1 x IDC plug, 26-pin
Core cross section0.25 ... 1.5 mm2 (24 ... 16 AWG)
Material
HousingPVC
HousingPVC
Massapprox. 210 g
Dimensions110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D)
Height125 mmWidth110 mmDepth61 mm
Height125 mm
Width110 mm
Depth61 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001

Data for application in connection with hazardous areas

CertificatePF 11 CERT 1930 X
Marking II 3G Ex nA IIC T4 Gc
MarkingII 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010

General information

Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Pepperl Fuchs FI-PFH-NS0137-R”

Your email address will not be published. Required fields are marked *