Acim Nidec Digitax HD M750 Ethernet

The multi-protocol drive that does it all
Digitax M750 is an extremely versatile multi-protocol network drive.It supports EtherNet/IP, Profinet RT and Modubus TCP/IP as well as peer-to-peer synchronisation with RTMoE (Real Time Motion over Ethernet). It also features and onboard Advanced Motion Controller for distributed 1.5 axis motion control.
 
One servo system for ALL your automation needs

 
The perfect mix of application-specific features developed into a single solution  

Open, efficient, synchronised Ethernet
Maximise machine productivity through high performance deterministic Ethernet. Access future developments in IT-based industries where billions of nodes are installed, future proofing your investments. Ethernet webpages hosted onboard the M750 Ethernet drive 

Rationalise inventory
Machine builders often need to maintain multiple PLC environments to serve different geographical markets. With its multi-protocol ethernet interface and on-board motion capability, Digitax M750 allows the same drive and motion design to be used in different ecosystems, rationalising inventory and spares             

Reduce design time
Share the same design on multiple systems to reduce complexity. 
PLC Controlled Motion simplifies integration of the M750 multi-protocol drive into the most common PLC environments. It provides easy access to the drive’s onboard Advanced Motion Controller through a simplified drive configuration workflow, automatic configuration of the communication links and PLC function block libraries.   

 
Features
 
Maximum performance

300% peak current performance pulse-duty overload
Optimised control loops for high dynamic performance
Up to 16 kHz switching frequency (default ratings specified at 8 kHz)
Supports a wide range of feedback technologies including EnDat 2.2, Hiperface SinCos, Incremental Quadrature, SinCos, BiSS-C, SSI, Resolvers and others.
Maximum performance package with high torque density, low inertia Unimotor hd servo motors

Supports RTMoE (Real-Time Motion over Ethernet) which provides synchronised communication between drives using the Precision Time Protocol as defined by IEEE1588 V2:

Distributed clocks are used to automatically synchronise the position, speed and current loops across all drives
1 ms cycle time for synchronous cyclic data
High speed network synchronisation of less than 1 μs jitter (typically (typically <200 ns) and 1 ms cycle time for synchronous cyclic data
Multi-protocol Ethernet support of EtherNet/IP or PROFINET RT in addition to Modbus TCP/IP, HTTP and SMTP

Advanced 1.5 axes Motion Controller, key features include:

250 μs cycle time
Motion profile generator
Electronic gearbox
Interpolated cam
Homing functions
High speed position freeze

Minimum size

40 mm drive width and option bracket adds 22 mm, providing a maximum drive width of 62 mm;
Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard);
Fits into cabinets just 200 mm deep.

Easy installation and setup

DIN rail alignment;
Kits for easy multi-axis installation;
Single motor cable and electronic motor name plate for fast set up;
Seamless motor-drive pairing with Unimotor hd servo motors;
Easy access pluggable connectors;
Rapid commissioning with the Connect PC tool and SD cards;
Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features;

Programmable with IEC61131 standard languages.

Flexibility

Two option slots to add features and functionality for Communication, Feedback, I/O and/or Machine Controller (please see `Options & Accessories` section for details)
Multi-protocol Ethernet

Safety on-board

Reduced downtime with machine safety
– Integrated dual Safe Torque Off (STO)
– Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
– Safe motion and CIP Safety with MiS250 option

 
Functional Safety
All Digitax HD drives have integrated dual Safe Torque Off (STO) inputs, certified to SIL3 / PLe, providing an elegant and reliable safety solution. 
The addition of an MiS250 safety option extends the built-in STO with the ability to safely monitor and/or restrict the scope of motion. 
Safety functions include: STO, SBC, SOS, SS1, SS2, SLS, SSM, SLA, SDI, SLP & SES
For maximum flexibility in the safety system architecture, the modules support both wired and network safety connections: CIP-Safety on EtherNet/IP and Safety over EtherCAT (FSoE).
To find out more, visit our Functional Safety page.
 
Software

  Connect – intuitive commissioning software
Connect is our latest drive configuration tool for commissioning, optimising and monitoring drive/system performance.
Download

  Machine Control Studio – programming tool
Control Techniques’ Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features.
Download

 
This product comes with 5-year warranty as standard
No registration. No extra cost. Just peace of mind from day one. Learn more.